GSF 245-18 User manual and spare parts

Congratulations on purchasing a Globus product! Before using the equipment, we ask that you carefully read the user manual. Please keep this manual and pass it along if you sell the product to others. Underhaug manufactures a range of products such as: stone pickers, stone rakes, stone grabs, round bale forks, pallet forks, harrows, Cambridge rollers, crosskill rollers, snow blowers, excavator buckets, quick coupler systems, and other construction equipment for excavators. If you would like to learn more about our products, you can visit our website at www.underhaug.no or contact us by phone...

DECLARATION OF CONFORMITY Producer: Torlandsveien 3 4365 Nærbø N-NORWAY We hereby declare under our own responsibility that the following product: Type: Serial No.: Year of Manufacture: covered by this declaration, complies with the following standards: • NS/EN ISO 13857: 2008 • NS/EN 13021: 2003 + A1: 2008 • NS/EN ISO 12100: 2010 • Directive 2006/42/EC ___________________________________ Sales manager Arild Høi

Adjusting of working dept/width 10 Replacing wear parts 12 Slewing ring / engine 22

2 SAFETY 2.1 Instruction manual Anyone using the Globus snow blower GSF 245-18 must familiarize themselves with the contents of the instruction manual before operating the machine. 2.2 Caution Ensure no people are in the snow blower’s discharge area. Snow, ice, stones, and other foreign objects ejected from the blower can cause injury to people, vehicles, buildings, and other objects. Adjust the throw distance and direction of the discharge stream by controlling the engine speed, lowering the chute, and swiveling the chute to avoid damage. Pay special attention when reversing to ensure no people...

Rotating parts. Read the user manual. When performing repairs, always remove the key from the ignition. 2.9 Lifting points The snow blower housing is equipped with three lifting points, marked with the symbol illustrated. Please note that a snow blower weighs approximately 820 kg. Therefore, always use straps designed for this total weight.

The Globus GSF 245-18 is a robust and functional V-blower suitable for medium to large tractors from 70 hp to 170 hp. The blower is supplied with a fixed three-point hitch, adapted to current standards. The blower requires skilled operation, and the user manual should be read before connection and operation, even if you have prior experience with similar machines. The Globus GSF 245-18 has a symmetrical blower housing, meaning the blower has equally long side walls. The housing has a sharp V-shaped design, providing a sharp cutting angle against the ground, allowing easy snow intake. On the fan...

Available optional equipment for the Globus GSF 245-18 is listed below.

The blower is delivered fully ready for use unless otherwise agreed. (Note: The PTO shaft is adapted to the tractor.) The GSF 245-18 comes standard with mounting holes that provide multiple options for adjusting the desired position of the deflector. If the blower has been ordered with hydraulic control (127320), it will be delivered with this installed. The edge cutter can be supplied separately or mounted, depending on practical reasons such as shipping, etc. Always use the PTO shaft supplied with the machine. It is adapted to the snow blower's power requirements and equipped with an 8.8 shear...

The snow blower is designed for a PTO that provides 540 RPM. The forward speed and gear selection depend entirely on snow conditions and tractor type. The PTO should only be engaged at low engine speed. The working width of 245 cm can be adjusted by mounting edge cutters (see technical data 3.3). The edge cutters for the right and left sides add approximately 20 cm in width, thereby increasing the blower's stated working width. The depth of the blower is adjusted with the skid shoes, which can be raised or lowered. Another option is the wheels (see optional equipment 3.4), which can be adjusted...

After 5 hours of operation with a new blower, all bolt connections should be checked and tightened where necessary. This should then be checked regularly. • The snow blower is equipped with two ball bearings for the support of the fan shaft. The bearings are filled with grease and have built-in seals. Both are equipped with grease nipples and should be lubricated every 8 operating hours and when the snow blower is stored for the spring. • The six auger blades in front of the fan have grease nipples. These should be lubricated with grease every 8 operating hours. • The swivel ring has a grease...

Globus snow blowers are equipped with wear blades made of Hardox 500, which provide excellent wear resistance. The wear blades are reversible on both the right and left sides, and replaceable under the fan housing. When the wear blades are worn down on both sides, they should be replaced before the wear reaches the blower housing. The wear blades are bolted with M16x40 locking bolts all around and are easy to replace. The paint color code is red RAL 3000. 7.1 What is covered by the warranty 1. The warranty covers the repair of defects or faults in the product or components that are part of the...

SPARE PARTS

Wearing steel

Swivel ring / engine

WWW.UNDERHAUG.NO PRODUCER: Underhaug AS 4365 Nærbø N-NORWAY