*mydirectindustry

Catalogs
Underhaug AS
Globus self-loading spreading bucket GSK 1600

Globus self-loading spreading bucket GSK 1600

Product catalog summary

Introduction
This manual is for the Globus GSK 1600 spreading bucket, providing product information, safety instructions, assembly guidelines, user tips, maintenance procedures, spare parts list, and warranty terms. Underhaug ensures quality and spare parts availability for 10 years.

Safety
Operators must read the manual before use. Key safety concerns include crushing hazards and hydraulic pressure risks. Disconnect oil pressure and remove the ignition key before maintenance. Use protective gear when handling hydraulics.

Product Information
The GSK 1600 is suitable for small to medium tractors, with a 2-meter working width and 900-liter capacity. It is self-loading and can be mounted at the front or rear of a tractor. The discharge roller speed is hydraulically controlled.

Assembly and Connection
The bucket is delivered fully assembled. A hydraulic telescopic top link is required for rear mounting. Ensure no one is between the tractor and bucket during connection. Use counterweights for stability.

User Tips
Park the bucket in a frost-free area to prevent freezing. Use gritting material sized 4-8 mm. Ensure material is thawed before loading.

Maintenance
Regularly check and retighten screws and chains. Lubricate the chain every 8 hours of operation. Inspect hydraulic hoses for damage. Clean the bucket after use to prevent rust.

Spare Parts
A detailed list of spare parts is provided, including part numbers and descriptions.

Warranty
The product is warranted against defects for 12 months from the sale date. The warranty is valid only if the product is used according to the manual. Claims must be made in writing within the warranty period.

Warranty Conditions
Repairs for product faults are covered. Defects from material failure or manufacturing errors are included. New parts are delivered free under standard shipping; expedited shipping costs are covered by the customer.

Invalid Warranty Conditions
Improper use, non-original spare parts, or failure to perform maintenance voids the warranty.

Exclusions from Warranty
Financial loss due to downtime, consequential damages, normal wear and tear, and shipping costs for repairs are excluded.

Maintenance Overview
A table is provided for recording maintenance activities, including bearings, steering tie rod, impactor rubber, hydraulic chain transmission, and signatures.

Annual Mandatory Inspection
Includes a section for recording the date, controller approval, and signature as per the User Directive.

Producer Information
Underhaug AS, located in Nærbø, Norway.

Catalog excerpts

SPREADING BUCKET GSK 1600 User manual and spare parts

Open the catalog to page 1

User manual and spareparts GSK 1600 WELCOME AS A UNDERHAUG CUSTOMER! Congratulations on purchasing a Globus product! Before using the equipment, we ask that you carefully read the user manual. You should keep this manual and pass it along if you sell the product to others. Underhaug manufactures a wide range of products, including stone pickers, stone rakes, seeders, round bale forks, pallet forks, harrows, Cambridge rollers, crosskill rollers, snow blowers, potato machines, excavation buckets, quick coupler attachments, and other construction equipment for excavators. If you would like to learn...

Open the catalog to page 2

User manual and spareparts GSK 1600 We hereby declare under our own responsibility that the following product: Type: GSK 1600 Spreading bucket Year of Manufacture: 2024-> covered by this declaration, complies with the following standards: Sales manager Arild Hoien

Open the catalog to page 3

User manual and spareparts GSK 1600 Front- and rear mounting 8

Open the catalog to page 4

User manual and spareparts GSK 1600 2 SAFETY 2.1 Operating instructions Anyone using the Globus spreading bucket GSK-1600 must familiarize themselves with the contents of the operating manual before the machine is used. 2.2 Caution Ensure that no one is in the working area of the spreading bucket. 2.3 Crushing hazard at discharge roller during standstill If the discharge roller becomes blocked by ice, stones, or other foreign objects, the oil pressure must always be disconnected, the engine stopped, and the key removed from the ignition before cleaning begins. If necessary, the feed system can...

Open the catalog to page 5

User manual and spareparts GSK 1600 2.1 Safety Marking Globus spreading bucket are equipped with various warning signs that indicate actions to be taken to avoid injuries and accidents. The symbol appears on warning signs located in various places on the machine. These are shown in the images below. If the markings are removed from the spreading bucket, new ones can be supplied by the manufacturer or dealer. Rotating parts. Read the user manual. During repairs, the key must always be removed from the ignition. 2.9 Lifting points The strøkasse frame is equipped with two points marked with the...

Open the catalog to page 6

User manual and spareparts GSK 1600 The Globus GSK 1600 is a robust and functional spreading bucket suitable for small and medium-sized tractors or mounted on a front loader in combination with other plowing equipment. The spreading bucket is supplied with optional mounting (Three-point, HMV, or Triangle) compatible with the relevant standards. The spreading bucket requires trained operators, and the operating manual should be read before connection and activation, even if the operator has experience with similar machines. The Globus GSK 1600 is a simple and reliable spreading bucket for spreading...

Open the catalog to page 7

User manual and spareparts GSK 1600 2 ASSEMBLY AND CONNECTION 2.1 Assembly The spreading bucket is delivered fully assembled and ready for use unless otherwise agreed. The GSK 1600 has a replaceable coupling frame and is supplied with an optional attachment. 2.2 Rear and front mounting If the GSK-1600 is to be mounted at the rear of the tractor, a hydraulic telescopic top link must be used to maintain the self-loading capability. For front mounting, the spreading bucket is filled in the same way as a bucket. Note: Be aware of the tractor's front load capacity and check the front loader's capacity....

Open the catalog to page 8

User manual and spareparts GSK 1600 After a few hours of operation with a new spreading bucket, all screw connections should be checked and re-tightened where necessary. Afterward, the screw connections should be checked regularly. The chain should be re-tightened after a few hours of operation, as it stretches when new. Tightening of the chain is done with the tightening device in the chain box. • The chain should be lubricated every 8 hours of operation. • The adjustment arm on the side of the spreading bucket should be moved regularly, and the bearing should be lubricated with oil (Position...

Open the catalog to page 9

User manual and spareparts GSK 1600

Open the catalog to page 10

User manual and spareparts GSK 1600

Open the catalog to page 11

User manual and spareparts GSK 1600

Open the catalog to page 12

User manual and spareparts GSK 1600

Open the catalog to page 13

User manual and spareparts GSK 1600 Underhaug AS guarantees that the product, including all parts, is manufactured in accordance with the applicable specifications and is free from material or manufacturing defects for a period of 12 months from the date of sale. The sales date is considered to be the invoice date. A receipt for the paid invoice serves as the warranty certificate. For the warranty to be valid, the following conditions must be met: • The product must be set up and used according to the user manual and warnings provided by the manufacturer or dealer. • Warranty claims must be made...

Open the catalog to page 14