UM 7790 XL Twin Bale lifter User manual and spare parts Edition Reviced Language Original user manual 1

Warranty This Underhaug product is warranted against manufacturing and material defects for a period of one year. Components not manufactured by Underhaug, such as electrical and hydraulic equipment, power take-off (PTO) shafts, and tires, are covered according to the original manufacturer’s warranty terms. Limited Warranty for Specific Components: Due to their functional nature, the following components have limited warranty coverage: Tires, blades, blade tips, shear bolts, fuses, and hydraulic seals in pumps, motors, valves, and cylinders, etc. Wear and tear resulting from normal use is considered...

Safety Before operating the machine Before operating, adjusting, or repairing the machine, the user, repairer, and owner must familiarize themselves with the safety instructions provided in this manual (Fig 1). Be attentive and cautious when working with agricultural machinery. Read and take note of the safety instructions in this manual. Safety at work is your responsibility General safety instructions Exercise caution when other people or animals are nearby Never start the machine when people or animals are close to the machine and tractor. Never stand between the tractor wheels and the machine...

The tractor engine should be stopped and the ignition key removed before performing any repair work, lubrication, or other maintenance on the machine. (Fig. 6). Ensure that all covers are in good condition and properly mounted. Do not attempt to start the machine until this has been done. Damaged covers should be repaired or replaced immediately. (Fig. 7). Pay special attention to all protective covers related to the power take-off shafts. Replace damaged covers. Safety chains must always be attached to the machine and/or tractor to prevent the protective sleeves from rotating. Be cautious when...

When disconnecting the machine and leaving the tractor/machine Set all hydraulic functions to the neutral position when disconnecting the machine. Lower the movable working components to the ground or set them in the transport position and secure them. If the machine is equipped with parking blocks, these should be used. Do not allow children to play or remain near agricultural machines. (Fig. 9). Drive Safely Remember, you are responsible – carelessness and negligence can cause serious injury or even death. (Fig. 10). Check the wheel bolts and the connection between the machine and tractor before...

Instructions for UM 7790 XL Twin bale lifter This equipment is marked with this warning sign. If the sign is damaged, it must be replaced. Warning sign 220532 (fig. 1). Remember! Read and understand the instruction manual before using the equipment and before adjusting and performing maintenance. Warning Sign 220532 (Fig. 1). Caution. Read and understand the instruction manual before using the equipment, and before adjusting or performing maintenance. Warning Sign 220538 (Fig. 2). Due to the high risk of crushing, it is essential to keep people at a safe distance when the equipment is in use....

Warning signs/labels on the machine Machine Application The UM 7790 XL is designed to handle 2 round bales up to 150 cm. The UM 7790 XL TwinLift is quick and easy to operate. It is made for mounting on the tractor’s three-point hitch, which is also compatible with Waltrascheid coupling hooks. In other words, it is possible to have a Twin-Lift at the rear and a UM 7780 at the front, allowing for the transport of 3 bales simultaneously. When wrapped bales need to be transported from the field and the storage area is relatively close, the Twin-Lift is the ideal solution for efficient transportation....

Use of round bale lifter Do not lift more than the equipment is designed for. Drive carefully with heavy loads on uneven surfaces. The operation is the same as for the UM 7780, which is designed to handle one bale at a time. On the UM 7780, two lifting tubes are welded to each arm, hanging freely and able to move in and out with an outer and inner limit. When the bale lifter is lowered so that the lifting tubes touch the ground, the tubes slide apart to the outer limit. This allows them to be positioned on each side of the bale to be lifted. When the bale lifter is raised, the arms with the lifting...

Technical data Weight: Max. bale diameter: Max. bale weight: Different couplings that can be selected UM 7795 UM 7796 UM 7797 UM 7798 Trima/Ålø/HMV Triangle Euro Combi: HMV/Trima/SMS/Lyng triangel/3-pkt

Responsible person Name Position Company Address Phone Atle Årsland General Manager Underhaug AS Torlandsvegen 3 4365 Nærbø, NORWAY +47 51 43 49 78 Declares that the following machine: Manufacturer: Type: Serial Number: Production Year: Underhaug AS UM 7790 XL Twin Bale Lifter complies with the following directive: Maximum regulation 554 (for 2009-05-20-554) and meets essential health and safety requirements. Basic standard ISO 12100 _______________________________________ Atle Årsland ______________________ Nærbø, date