UM 7762 COMBIGRIP User manual and spare parts Edition Revised Language Original user manual

Warranty This Underhaug product is warranted against manufacturing and material defects for a period of one year. Components not manufactured by Underhaug, such as electrical and hydraulic equipment, power take-off (PTO) shafts, and tires, are covered according to the original manufacturer’s warranty terms. Limited Warranty for Specific Components: Due to their functional nature, the following components have limited warranty coverage: Tires, blades, blade tips, shear bolts, fuses, and hydraulic seals in pumps, motors, valves, and cylinders, etc. Wear and tear resulting from normal use is considered...

Safety Before operating the machine Before operating, adjusting, or repairing the machine, the user, repairer, and owner must familiarize themselves with the safety instructions provided in this manual (Fig 1). Be attentive and cautious when working with agricultural machinery. Read and take note of the safety instructions in this manual. Safety at work is your responsibility General safety instructions Exercise caution when other people or animals are nearby Never start the machine when people or animals are close to the machine and tractor. Never stand between the tractor wheels and the machine...

The tractor engine should be stopped and the ignition key removed before performing any repair work, lubrication, or other maintenance on the machine. (Fig. 6). Ensure that all covers are in good condition and properly mounted. Do not attempt to start the machine until this has been done. Damaged covers should be repaired or replaced immediately. (Fig. 7). Pay special attention to all protective covers related to the power take-off shafts. Replace damaged covers. Safety chains must always be attached to the machine and/or tractor to prevent the protective sleeves from rotating. Be cautious when...

When disconnecting the machine and leaving the tractor/machine Set all hydraulic functions to the neutral position when disconnecting the machine. Lower the movable working components to the ground or set them in the transport position and secure them. If the machine is equipped with parking blocks, these should be used. Do not allow children to play or remain near agricultural machines. (Fig. 9). Drive Safely Remember, you are responsible – carelessness and negligence can cause serious injury or even death. (Fig. 10). Check the wheel bolts and the connection between the machine and tractor before...

Instructions for UM 7762 Combigrip This equipment is marked with this warning sign. If the sign is damaged, it must be replaced. Warning sign 220532 (fig. 1). Remember! Read and understand the instruction manual before using the equipment and before adjusting and performing maintenance. Warning Sign 220532 (Fig. 1). Caution. Read and understand the instruction manual before using the equipment, and before adjusting or performing maintenance. Warning Sign 220538 (Fig. 2). Due to the high risk of crushing, it is essential to keep people at a safe distance when the equipment is in use. Warning Sign...

Machine application Technical data Weight: Length: Width: Hight: The UM 7762 Combigrip, with 1 double-acting cylinder and anti-slip valve, is a versatile product primarily designed for picking up collapsed round bales from a stack without damaging the plastic. It can also handle round bales in various ways, including for handling square bales, all with a maximum weight of 1100 kg. The Combigrip is designed for mounting on the tractor's front loader. Underhaug cannot guarantee the strength and/or twisting of the tractor's loading equipment and front axle. Operating new equipment Mount the gripping...

Use of the Combigrip Move the gripping arm to the outer position before driving the grabber towards the bale. Press the arms against the bale so that it is securely gripped. Lift the bale. When picking up round bales from a stack, this is easiest done by gripping the bale at the upper edge with the front gripping arm and at the lower edge with the rear gripping arm. Position the Combigrip in the outer position, gently clamp and break down the outer gripping arm at the upper edge "behind" the bale, then squeeze while simultaneously driving forward slightly with the rear gripping arm until the...

SPARE PARTS

Frame welded Clamp welded Hinge bolt Cylinder bolt Piston rod bolt Hydraulic cylinder Hydr.hose 3/8’’, 1500 mm Adapter 3/8’’ Dofti gasket Clamp double Clamp plate Grease niple M6 Straight

Responsible person Name Position Company Address Phone Atle Årsland General Manager Underhaug AS Torlandsvegen 3 4365 Nærbø, NORWAY +47 51 43 49 78 Declares that the following machine: Manufacturer: Type: Serial Number: Production Year: complies with the following directive: Maximum regulation 554 (for 2009-05-20-554) and meets essential health and safety requirements. Basic standard ISO 12100 _______________________________________ Atle Årsland ______________________ Nærbø, date