Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Umicore Electronic Materials
  3. Thermal Imaging Coatings, High Efficiency Anti-reflection coating
video corpo

Thermal Imaging Coatings, High Efficiency Anti-reflection coating

Thermal Imaging Coatings, High Efficiency Anti-reflection coating
1 / 1 PageView full catalog

Thermal Imaging Coatings, High Efficiency Anti-reflection coating

Product catalog summary
Application
This document details the specifications for a high-efficiency anti-reflection coating designed for the 8-12µm waveband. It is optimized for internal surface applications, offering high transmission, low reflection, and moderate environmental resistance. Notably, the coating is free from radioactive materials.
Transmission
For a 1mm thick sample coated on both sides, the transmission rates are:
  • Greater than 97% average for 8-12µm
  • Greater than 95% average for 8-14µm
Reflection
The reflection per surface is:
  • Less than 1.0% average for 8-12µm
  • Less than 1.5% average for 8-14µm
Environmental Standards
The coating adheres to the following environmental standards:
  • Adhesion: MIL-C-48497A, Tape test
  • Humidity: MIL-C-48497A, 24 hours at 49°C, 95-100% relative humidity
  • Abrasion: MIL-C-48497A, Moderate, 50 strokes with a cheesecloth
Sizes
The coating can be applied to surfaces up to 275mm in diameter.
Typical Reflection & Transmission Values
Graphs indicate transmission values ranging from 84% to 100% and reflection values per surface from 0% to 10% across the 7-14µm wavelength range.
Contact Information
Umicore Coating Services Ltd, Dundee, DD2 3ED, UK. Tel: +44 1382 833022, Fax: +44 1382 833824, Email: [email protected]
Note
Specifications are subject to change without prior notice.
See more

Catalog excerpts

Thermal Imaging Coatings, High Efficiency Anti-reflection coating-1

High Efficiency Anti Reflection Coating on GASIR® from 8-12µm Technical Data Sheet UCS_GASIR_01 Application This coating is the standard anti-reflection coating for use in the 8-12µm waveband. Combining high transmission, low reflection and moderate environmental resistance, this coating is best suited for internal surfaces (I.S.) applications. This coating contains no radioactive material. Transmission For a 1mm thick witness piece, coated both faces UCS_GASIR_01 T > 97% average for 8-12µm T > 95% average for 8-14µm Reflection Per surface R < 1.0% average for 8-12µm R < 1.5% average for 8-14µm Environmental Adhesion Humidity Abrasion Tape test 24hrs, 49oC, 95-100% relative humidity Moderate, 50 strokes with a cheesecloth Typical Reflection & Transmission Values UCS_Gasir_01 Transmission Umicore Coating Services Ltd Kinnoull Street Dundee, DD2 3ED Tel: +44 1382 833022 Fax: +44 1382 833824 e-mail:[email protected] UCS reserves the right to amend or withdraw specifications without prior notice

 Open the catalog to page 1

All Umicore Electronic Materials catalogs and technical brochures

  1. High Efficiency Anti Reflection 3µm-5µm
    High Efficiency Anti Reflection 3µm-5µm

    2  Pages

  2. Narrow pdf-row Bandpass Filter
    Narrow pdf-row Bandpass Filter

    2  Pages

  3. GASIR® Infrared Lens 75 mm f/1.1
    GASIR® Infrared Lens 75 mm f/1.1

    2  Pages

  4. GASIR® Infrared Lens 35 mm f/1.1
    GASIR® Infrared Lens 35 mm f/1.1

    2  Pages

  5. GASIR® Infrared Lens 18.6 mm f/1.0
    GASIR® Infrared Lens 18.6 mm f/1.0

    2  Pages

  6. GASIR® Infrared Lens 3.9 mm f/1.1
    GASIR® Infrared Lens 3.9 mm f/1.1

    2  Pages

  7. GASIR® Infrared Lens 3.7 mm f/1.3
    GASIR® Infrared Lens 3.7 mm f/1.3

    2  Pages

  8. GASIR® Infrared Lens 60 mm f/1.25
    GASIR® Infrared Lens 60 mm f/1.25

    2  Pages

  9. GASIR® Infrared Lens 4.9 mm f/1.1
    GASIR® Infrared Lens 4.9 mm f/1.1

    2  Pages

  10. Anti Reflection Coating 10.6µm
    Anti Reflection Coating 10.6µm

    2  Pages

  11. GASIR® Infrared Lens 6.8 mm f/1.3
    GASIR® Infrared Lens 6.8 mm f/1.3

    2  Pages

  12. GASIR® Infrared Lens 10 mm f/1.2
    GASIR® Infrared Lens 10 mm f/1.2

    2  Pages

  13. GASIR® Infrared Lens 8.5 mm f/1.2
    GASIR® Infrared Lens 8.5 mm f/1.2

    2  Pages

  14. GASIR® Infrared Lens 6.2 mm f/1.0
    GASIR® Infrared Lens 6.2 mm f/1.0

    2  Pages

  15. GASIR® Infrared Lens 1.9 mm f/1.3
    GASIR® Infrared Lens 1.9 mm f/1.3

    2  Pages

  16. GASIR® Infrared Lens 1.5 mm f/1.25
    GASIR® Infrared Lens 1.5 mm f/1.25

    2  Pages

  17. Sputtering targets for thin film batteries
    Sputtering targets for thin film batteries

    4  Pages

  18. Sputtering targets for semiconductor applications
    Sputtering targets for semiconductor applications

    12  Pages

  19. Sluttering targets and evaporation Materials for wear protection
    Sluttering targets and evaporation Materials for wear protection

    8  Pages

  20. GASIR®1 material
    GASIR®1 material

    2  Pages

  21. 50 mm f/1.0
    50 mm f/1.0

    2  Pages

  22. 1.9 mm f/1.3 M10
    1.9 mm f/1.3 M10

    2  Pages

  23. 14 mm f/1.2 - Athermalized Infrared Lens
    14 mm f/1.2 - Athermalized Infrared Lens

    2  Pages

  24. 3.7 mm f/1.3 - Athermalized Infrared Lens
    3.7 mm f/1.3 - Athermalized Infrared Lens

    2  Pages

  25. 75 mm f/1.1 - Athermalized Infrared Lens
    75 mm f/1.1 - Athermalized Infrared Lens

    2  Pages

  26. 60 mm f/1.25 - Lightweight Infrared Lens
    60 mm f/1.25 - Lightweight Infrared Lens

    2  Pages

  27. 35 mm f/1.1 - Athermalized Infrared Lens
    35 mm f/1.1 - Athermalized Infrared Lens

    2  Pages

  28. Germanium Ingots
    Germanium Ingots

    1  Page

  29. Germanium Granules
    Germanium Granules

    1  Page

  30. Germanium Metal Powder
    Germanium Metal Powder

    1  Page

  31. Filters: long-wave pass
    Filters: long-wave pass

    1  Page

  32. Filters: wide bandpass
    Filters: wide bandpass

    1  Page

Archived catalogs

  1. Filters: Short-Wave Pass
    Filters: Short-Wave Pass

    1  Page

  2. Zinc Selenide coatings: Anti-reflection coating
    Zinc Selenide coatings: Anti-reflection coating

    1  Page

  3. Filters: narrow bandpass
    Filters: narrow bandpass

    1  Page

  4. Copper coatings: DualBand Supermax R
    Copper coatings: DualBand Supermax R

    1  Page

  5. Silicon Coatings: DualBand Supermax R
    Silicon Coatings: DualBand Supermax R

    1  Page

  6. iDLC coating
    iDLC coating

    1  Page

  7. High Durability Anti-reflection Coating
    High Durability Anti-reflection Coating

    1  Page

  8. 100 mm f/1.5 - Athermalized Infrared Lens
    100 mm f/1.5 - Athermalized Infrared Lens

    2  Pages

  9. 60 mm f/1.25 - Athermalized Infrared Lens
    60 mm f/1.25 - Athermalized Infrared Lens

    2  Pages

  10. 35 mm f/1.2 - Athermalized Infrared Lens
    35 mm f/1.2 - Athermalized Infrared Lens

    2  Pages

  11. 25 mm f/1.2 - Athermalized Infrared Lens
    25 mm f/1.2 - Athermalized Infrared Lens

    2  Pages

  12. 19 mm f/1.2 - Standard Infrared Lens
    19 mm f/1.2 - Standard Infrared Lens

    2  Pages

  13. 10 mm f/1.2 - Athermalized Infrared Lens
    10 mm f/1.2 - Athermalized Infrared Lens

    2  Pages

  14. 17 mm f/1.2 - Athermalized Infrared Lens
    17 mm f/1.2 - Athermalized Infrared Lens

    2  Pages

  15. 13 mm f/1.0 - Athermalized Infrared Lens
    13 mm f/1.0 - Athermalized Infrared Lens

    2  Pages

  16. 8.5 mm f/1.2 - Athermalized Infrared Lens
    8.5 mm f/1.2 - Athermalized Infrared Lens

    2  Pages

  17. 8.1 mm f/1.1 - Athermalized Infrared Lens
    8.1 mm f/1.1 - Athermalized Infrared Lens

    2  Pages

  18. High Purity Germanium Tetrachloride
    High Purity Germanium Tetrachloride

    1  Page

  19. 6.8 mm f/1.4 - High Durability version
    6.8 mm f/1.4 - High Durability version

    2  Pages

  20. Germanium for infrared optics brochure
    Germanium for infrared optics brochure

    16  Pages

  21. Umicore brochure
    Umicore brochure

    16  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.