Minisonic 600 - full pipe ultrasonic flow meter

Product catalog summary

Overview: The Minisonic 600 is an ultrasonic fixed flow meter designed for quick installation and intuitive operation. It offers low installation costs and minimal maintenance due to its lack of mechanical wear. The device is housed in an IP67 cast aluminum enclosure, ensuring durability and reliability.

Key Features:

Automatic zero calibration and signal quality display.
Applicable for a wide range of liquids, including non-conductive and aggressive liquids.
Handles pipe diameters up to 630mm.
Available in standard, dual pipe, and dual chord models.

Applications:

Drinking water: Flow measurement and metering in treatment works and system control.
Wastewater: Measurement at pumping stations and treatment works.
Raw water: Measurement in fire mains and system supervision.
Chemical and pharmaceutical sectors: Measurement for acids, chlorides, and ultrapure water flows.

Technical Specifications:

Measurement on pipes under load, not suitable for open channels.
Internal pipe diameter range: 8mm to 600mm; external: 10mm to 630mm.
Inputs/Outputs: 2 current outputs (4-20mA), 2 static relay outputs.
Display: Alphanumeric and graphical, backlit LCD screen.
Setup: Via 4-key touchpad or dedicated software, with optional access code.
Operating system: Windows, supporting multiple languages.
Serial link: RS232 or RS485 with JBUS/MODBUS protocol.
Power supply: Low voltage (9-36V DC or 7-25V AC) with optional higher voltage.
Temperature range: 0°C to 50°C, extendable to 60°C on demand.

Performance:

Accuracy up to 0.5%, repeatability up to 0.1%, and linearity up to 0.1%.
Continuous bidirectional measurement with echo shape control.
Temporal resolution better than 0.1ns, with flow calculations every 500ms.
Volume metering from centilitres to 100 cubic metres.

Additional Information:

Considers laminar and turbulent transitions, except for parallel chords.
Flexible probe mounting options: modes /, V, N, and W.

Catalog excerpts

Minisonic 600 - full pipe ultrasonic flow meter-1

Minisonic 600 Full pipe ULT RAS ONIC FIXED FLOW METER media measured liquids models standard dual pipe dual chord pipe diameters up to 630mm s i mpl e great benefits RELIABLE AND ROBUST ›Q uick and easy installation › ow installation cost L › utomatic zero A calibration › ntuitive operation I › o mechanical wear: N little or no maintenance FLEXIBLE › n every type of O homogeneous liquid even non-conductive › on ideal flow conditions N taken into account › ignal quality display S › P67 cast aluminium I enclosure typical Applications MINISONIC F 600 Drinking water: Flow measurement and metering in treatment works, abstraction metering, system control Waste water: Flow measurement at pumping stations, in systems, at intakes/outlets in treatment works Raw water: Flow measurement in fire mains, system supervision Chemical products: Flow measurement for acids, chlorides Pharmaceutical sector, including agressive liquids: Ultrapure water flows Automotive, food and farming, energy... expert in flow meters s i n c e 1 974

Open the catalog to page 1

Minisonic 600 - full pipe ultrasonic flow meter-2

Minisonic 600 m od e l STANDAR D dual pipe (identical probes) dual chor d Fixed Me asur e me n t on pipe und e r load Yes F low me asur e me n t on op e n chann e l No In te rnal ø of pipe From 8mm to 600mm approximately (depending on wall thickness) Ext e rnal ø of pipe From 10mm to 630mm Inp uts/O ut puts › current outputs, 4-20mA (1000Ω galvanically isolated as a passive output/impedance of 150Ω 2 as an active output) › static relay outputs (100V - 100mA - 10VA max) 2 Use Flow measurement Flow measurement in two pipes Flow measurement with two speed chords S i n g l e or d ual pipe Single...

Open the catalog to page 2

Minisonic 600 - full pipe ultrasonic flow meter

Minisonic 600 - full pipe ultrasonic flow meter

Catalog excerpts

All ULTRAFLUX catalogs and technical brochures