Ultrafilter Sterile Air & Steam Catalogue 2019
26Pages

STERILE AIR & STEAM Proces Air 6 Steam Filter Process Air Prefilter Element Filter Housing For Steam Sterile Depth Filter Element Sterilization Procedure Process Filter Housing Sterile Tank Filter Sterile Membrane Filter Vent Filter Ptfe Sanitary Air Filter Housing GUIDES Finding The Right Size Dryer Particles In Liquid Filtration Compressor Capacity Icon Guide Material(s) Surface Roughness Filtration Rate Inlet/Outlet Connection Differential Pressure O-ring Material For filter elements this is describing the filter media. The roughness of the filter housing surface. Described in µm. Refer...

THE FILTRATION MANUFACTURER THE SCANDINAVIAN FILTRATION PARTNER Ultrafilter Scandinavia offers a wide selection of filtration products for compressed air, liquids and gas. We have stock in Denmark and from here we distribute all of our products to Scandinavia and the Baltic countries. Ultrafilter Scandinavia is a part of the Ultrafilter Group. Production is in Germany and we have several subsidiaries in Europe and the United States. In all countries, you can buy our products on local websites. Information about our products as well as brochures and manuals can be found on our website. We...

Our sterile filters are all FDA CFR article 21 / EC 1935/2004 validated and approved. “Sterile” means “free of microorganisms that are capable of reproducing itself”. A more scientific definition of sterile is that a filter is defined as “sterilizing filter”, when exposed to a concentration of 107 microorganisms (Brevundimonas diminuta) per. cm² filter area and the filtrate is 100% sterile and therefore not containing microorganisms, such as bacteria. Coli and streptococci typically have a size between 0,3 microns and 9 microns, resulting in that the sterile filter has a Filtration of 0,2...

PROCESS AIR PREFILTER ELEMENTP-FF / P-MF / P-SMF / P-AK Binderfree nanofibres, Pleated cerex (JT) 0,01 pm [IF| 99,999% - 99,99999% [jp| -20°C to 80°C |Ap| Max. 5 bar @ 20°C [j*j] Stainless steel SS304 end caps |Q| Perbunan Gasket (others available) All our standard coalescing, particulate and activated carbon filters are available as pre-filters for our stainless steel filter housings for critical installations. Thanks to the unique combination of binder free, non-woven nanofiber filter media and our special pleating techniques, we can achieve a reduction of energy costs up to 70%, at a...

STERILE DEPTH FILTER ELEMENT P-SRF Technical Data Borosilicate 0,2 µm 99,99998% -20°C to 200°C Stainless steel SS304 end caps Silicone (others available) Bacterial retention: LRV > 7/cm² for T1 Coliphagen Regeneration: 100 times The P-SRF is a wounded depth filter with inner and outer guard end caps made of stainless steel. Consisting of a three-dimensional borosilicate depth media, the P-SRF achieves a void volume of 95%, ensuring a high containment capacity at high flow rates and low differential pressure. A retention rate of >99.99998% related to 0.2 μm is achieved during operation. All...

PROCESS FILTER HOUSING EG Technical Data V: r O SS304 or SS316L 200°C (250°C as option) EPDM seal (others on request) 0006-0192: 16 bar P-EG filter housings in stainless steel, designed for purification of compressed air and other technical gases. With this filter you can achieve low differential pressure at high flow rates. P-EG Filter housings are available in 18 different sizes from 60 to 19200 Nm3/ hour. The P-EG is our first-choice housing for most process air applications. Such as pre-filtration, sterile filtration and steam filtration. Correction factor: Operating pressure

Ultra-Mem PF-PT / PF-PP This element is Technical Data [Ap] Max. 6 bar @ 20°C [j*j] Code 7 (others available) [Q] Silicone (others available) For critical applications in sterile filtration, use of a hydrophobic PTFE membrane is recommended, especially in applications such as pharmaceutical industry and biotechnology. PTFE membranes are also well suited for sterile steam applications. For certain chemicals and applications, polypropylene membranes are available. Membrane Filter A membrane filter is made of polymeric plastic film - typically polypropylene, these filters have less particle...

SANITARY AIR FILTER HOUSING PG-EG I Technical Data ffl o [ffi Code Y (UF) or Code 7 EPDM (others available) PED PG-EG stainless steels have been developed for the purification of compressed air and other technical gases in pharmaceutical, biotechnology and chemical industries. PG-EG houses are “first choice” in critical applications in sterile filtration. All PG-EG filter housings to a certain size have been etched and passivated on the inner surface to a quality of Ra 0,8. The outer surface has this quality or better for every PG-EG sanitary filter housing. Tri-clamp ASME Dairy Union...

Technical Data (Vj) Sintered steel SS316L [M] 1 ^m, 5 ^m or 25 ^m [lfT| 98 (steam) / 100% (gasses) [r]-20°C to 210°C [Ap] Max. 5 bar [j^j] Stainless steel SS304 end caps Code Y (UF), DOE or Code 7 EPDM (others available) The ultrafilter P-GS filter is designed for removal of particles from gases, liquids and particularly steam. The P-GS consists of a restorable weldless filter pipe made from sintered stainless steel. The filter is well suited for culinary steam - where contact with production machines and end product is needed. The P-GS is suited for use in temperatures ranging from -20°C...

FILTER HOUSING FOR STEAM 25 bar on request EPDM seal (others available) For our PG-S steam filters we use our P-EG filter housing with flange connections. With this filter you can achieve low differential pressure at high flow rates. P-EG Filter housings are available in 12 different sizes, in either 304 or 316 stainless steel. For particularly high quality demands, we offer our sanitary filter housing PG-EG for steam filtration. Filter Housing Element Size Flow rate at 121°C saturated steam Correction factor: Operating pressure Saturated steam temp. Correction factor