LRA Series
8Pages

Extraction and Filtration Technology for Soldering Fumes ULT UMWELT- LUFTTECHNIK Extraction. Filtration. Persistence.

Whether manual workstations or automated production line, soldering workstations may only be operated with properly working extraction and filtration technology.

An automated electronics production line creates many thousands of solder joints per hour, a craftsman will perhaps only make ten of them in the same time. However, all soldering processes emit fume and this fume is anything but harmless. Soldering fumes Substances that are perceived as soldering fumes are decomposition products from flux, soldering alloys and residues of cleaning agents, which often join up to tacky aerosols. These airborne pollutants may impose adverse effects on human health, therefore, legal regulations on the removal of soldering fumes from the air at workplaces are...

Extraction and Filtration with Stepped Performance Levels. Filtration system Type LRA devices are saturation filter units. Complex filter systems retain dusts, gaseous pollutants and aerosols. The purified air can then be re-circulated back into the working room, greatly enhancing energy management. To precisely capture pollutants, extraction and filtration units may be equipped with suitable extraction arms and collecting elements. For this purpose ULT offers high quality products from leading suppliers. Saturated storage filters are easily exchanged and can partly be refurbished. Due to...

LRA extraction and filtration technology includes a broad range of units, graded for air capacity. The offerings extend from small, ergonomically designed mobile units for individual workstations to high performance systems for automated or semi-automated production lines. Vacuum Nominal Some models can be optimised for special operating conditions, e.g. strong smoke emission or large amounts of certain harmful substances by exchanging or adding filtration modules. To eliminate odours, suitable adsorbents such as activated carbon are used. LRA 400-2 1,500

LRA stands for sophisticated production devices of extraction and filtration units for soldering workplaces - organised in modules according to user requirements. If needed, they allow for an optimised adaptation to respective operating conditions and become an integral part of the production plants. Particularly user friendly Low noise level and low energy consumption. Simple operation and maintenance. Air recirculation operation possible. Easy filter exchange - no protective measures required. Tailored solutions: from compact to large ULT's solutions range from mobile equipment for...

ULT AG provides extraction and filtration technology that really works: in-house developed excellent series units, adapted to individual requirements by sophisticated engineering. From single workplaces to hall solutions. Permanent research ensures that even the latest production processes are safely served. COMPLETE SOLUTIONS FUMES AND FUMES GASES, AND INDUSTRIAL DRYING SMOKE VAPOURS GASES Based on sophisticated series devices ULT AG provides adapted solutions for extraction and filtration technology.

ULT is certified according to ISO 9001:2008. The plants are designed according to international standards. If required, they will be certified according to ATEX and W3 and tested to meet H requirements. In addition, the plants always comply with current EC directives on energy efficiency (ErP directive: Total energy efficiency of ready-to-use ventilation systems or minimum energy efficiency of electric motors). Detailed technical information can be found on device specific data sheets or on our website All technical data is general and not binding and does not guarantee the suitability of a...