Product Overview:
The Speed-Pipe-Entry (SPE) system is designed for the installation of fibre optic cables in residential buildings, facilitating 'Fibre To The Home' (FTTH) connections. This system ensures a secure and professional entry for telecommunication providers and end-users.

Advantages and Benefits:

• Quick and easy installation within seconds.
• Gas- and watertight up to 1 bar pressure.
• Compatible with wall thicknesses between 200 and 600 mm, or 200 and 1100 mm.
• Wrinkle resistance both inside and outside the building.
• Immediate tightness after installation with blind sealing.
• No additional work required post-installation.

Installation Procedure:

1. Drill a hole of 40 to 45 mm using a hand drill.
2. Remove the sealing compound from the SPE and insert it into the drilled hole, ensuring proper pressure by checking the slots in the SPE rips.
3. Insert the Speed-Pipe-Line and secure it with screws. Attach the counter flange inside the building and fix the flexible tube as needed.

Additional Information:
UGA SYSTEM-TECHNIK GmbH & Co. KG provides a service manual with installation advice and recommends professional installation. Replacement parts are available for material defects affecting functionality, but not for defects from transport, storage, or improper installation. Technical amendments may occur, and users are advised to conduct their own tests and checks.

Contact Information:
UGA SYSTEM-TECHNIK GmbH & Co. KG, Heidenheimer Str. 80 – 82, 89542 Herbrechtingen, Germany. Phone: +49 7324 9696-0, Fax: +49 7324 9696-96, Email: [email protected], Website: www.uga.eu