KD 150 Cable Bushing iinng id eas e ad L SYSTEM-TECHNIK

KD 150 Cable Bushing Cable Bushing KD 150 System KD consists of a sealing collar which is designed as single or double collar and can be assembled into packages by means of the frames around the collar to be imbedded flush into the concrete of the formwork. The frame is provided with nail holes for fixing with stud nails. In order to prevent voids the multiple wall duct must be completely enclosed by concrete. When using individual packages the direction of installation has to be determined with the principal or planner prior to concreting. ̈ ̈ ̈ System KD 150 is suitable for the application...

Sealing Collars System Covers Application and Function KD 150 sealing collars are undivided plastic elements which will be supplied fitting to the wall thickness to be imbedded flush into the concrete of the formwork. Single Sealing Collar suitable for connection of a system cover or system KSS on one side. Applicable for a wall thickness from 60 mm. Direction of installation has to be determined! ✎ order no.: KD 150-K/L (L) = wall thickness in mm Single Sealing Collar with pipe connection plug-type sleeve suitable for connection of a system cover or system KSS on one side. Other side for direct...

Accessory GSS Application and Function System Cover with Sleeve for connection of a cable protection tube with an outside diameter of 80, 110, 125, 140, or 160 mm. Sealing by means of provided shrinkon sleeve. ✎ order no.: KD 150-DM 80 KD 150-DM 110 KD 150-DM 125 KD 150-DM 140 KD 150-DM 160 System Cover with 1 thick-walled connection piece and appropriate shrink-on sleeve. Suitable for 1 cable of dia. 60 - 158 mm or for the connection of a cable protection tube of max. 160 mm outside diameter. ✎ order no.: KD 150-D1/160 KD 150 system covers offer various possibilities for sealing cables and cable...

Packages Variable Packages Application and Function Variable Packages Single sealing collars can be plugged together at random next to each other or one on top of the other. Safety at a Glance Packages create central check holes which allow subsequent control of the concrete compaction! System KD consists of a sealing collar which is designed as single or double collar and can be assembled into packages by means of the frames around the collar to be imbedded flush into the concrete of the formwork. Angular Sealing Collar Section of angular sealing collar 45° 45º polystyrene wedge auxiliary frame...

Test Report UGA System KD 150 The tests with system KD were carried out at the Fraunhofer Gesellschaft Bremen (IFAM). These tests were to show if UGA’s cable bushings type KD 150 are gas- and watertight. A special test specimen consisting of a concrete part and a test bell was developed for this test. Sealing collar KD 150 was imbedded into the concrete part with a waterproof concrete. The surface of the concrete part was sealed as this test was to reveal the bonding characteristics of the sealing collar to the concrete and not the tightness of the concrete itself. All test specimens proved successful...