KD 110 Cable Bushing
6Pages

KD 110 Cable Bushing iinng id eas e ad L SYSTEM-TECHNIK

KD 110 Cable Bushing Cable Bushing KD 110 System KD 110 consists of a sealing collar which is designed as single or double collar and can be assembled into packages by means of the frames around the collar to be imbedded flush into the concrete of the formwork. The frame is provided with nail holes for fixing with stud nails. In order to prevent voids the multiple wall duct must be completely enclosed by concrete. When using individual packages the direction of installation has to be determined with the principal or planner prior to concreting. ̈ ̈ ̈ ̈ ̈ System KD 110 is suitable for the...

Sealing Collars System Covers Application and Function KD 110 sealing collars are undivided plastic elements which will be supplied fitting to the wall thickness to be imbedded flush into the concrete of the formwork. Single Sealing Collar suitable for connection of a system cover or system KSS on one side. Applicable for a wall thickness from 80 mm. Direction of installation has to be determined! ✎ order no.: KD 110-K/L (L) = wall thickness in mm Single Sealing Collar with pipe connection plug-type sleeve. suitable for connection of a system cover or system KSS on one side. Other side for...

Accessory Application and Function System Cover with Sleeve for connection of a cable protection tube with an outside diameter of 75, 80, or 110 mm. Sealing by means of provided shrink-on sleeve. ✎ order no.: KD 110-DM 75 KD 110-DM 80 KD 110-DM 110 System Cover with Plug-type Sleeve for connection of a smooth-walled cable protection tube with an outside diameter of 110 or 125 mm. Sealing by means of sealing lip in the plugtype sleeve. ✎ order no.: KD 110-DSM 110 KD 110-DSM 125 Conical System Insert of high-quality rubber. Suitable for sealing cables or cable protection tubes up to diameter...

Packages Variable Packages Application and Function Variable Packages Single sealing collars can be plugged together at random next to each other or one on top of the other. System KD consists of a sealing collar which is designed as single or double collar and can be assembled into packages by means of the frames around the collar to be imbedded flush into the concrete of the formwork. 370 Safety at a Glance Packages create central check holes which allow subsequent control of the concrete compaction! Angular Sealing Collar Section of angular sealing collar 45° 45º polystyrene wedge...

Test Report UGA System KD 110 The tests with system KD were carried out at the Fraunhofer Gesellschaft Bremen (IFAM). These tests were to show if UGA’s cable bushings type KD 110 are gas- and watertight. A special test specimen consisting of a concrete part and a test bell was developed for this test. Sealing collar KD 110 was imbedded into the concrete part with a waterproof concrete. The surface of the concrete part was sealed as this test was to reveal the bonding characteristics of the sealing collar to the concrete and not the tightness of the concrete itself. All test specimens proved...