GPD Rubber Press Seals iinng id eas e ad L SYSTEM-TECHNIK

GPD Rubber Press Seals Design Available with a rubber thickness of 30 mm for sealing against non-pressing water and a rubber thickness of 60 mm for pressing water. The „one-piece design” is suitable for installation during plumbing and wiring. For installation of the GPD after plumbing and wiring or under difficult conditions a „divided design“ is required. All metal parts are of stainless steel. ̈ ̈ ̈ GPD - plugs the gap No matter if cable or pipe system GPD always offers a safe solution. Rubber Press Seals can be inserted into the most varied pipe linings, diamond tipped drilled holes or entrance...

for cables for pipes Application and Function non-pressing water One-piece GPD, suitable for non-pressing water. Installation only possible during plumbing and wiring. Max. number of cables and diameter of grouping see grouping table on page 6. ✎ order no.: GPD (A)/1/(Z)x(D) (A) = outside dia. of GPD ‫ ־‬inside dia. of diamond tipped drilled hole or pipe lining (Z) = number of cables (D) = diameter of individual cables pressing water One-piece GPD, suitable for pressing water. Installation only possible during plumbing and wiring. Max. number of cables and diameter of grouping see grouping table...

Pipe Linings General Pipe linings will be supplied fitting to the wall thickness of the structural works and are imbedded flush into the formwork. Plastic Pipe Lining with labyrinth glands and expansion seal coating on the outside. Available from diameter 60 to 500 mm. ✎ order no.: FU-K (A)/(L) Fibre Cement Pipe Lining with labyrinth grooves on the outside. Asbestos-free material. Available from diameter 80 to 1500 mm. ✎ order no.: FU-FZ (A)/(L) (A) = inside dia. in mm (L) = wall thickness in mm (A) = inside dia. in mm (L) = wall thickness in mm Stainless Steel Pipe Lining material no. 1.4301,...

GPD Variants and Special Solutions The GPD Idea Suitable for the distribution of electricity, gas and water in structural and civil engineering. GPD rubbers are made of EPDM. As an option, they are also available in NBR. Rubber Press Seals are available in numerous variants and designs. For diamond tipped drilled holes and pips of all diameters. GPD with removable insert for changing repeated groupings, suitable for pressing water. ✎ order no.: GPD (A)/G/2/WE(A1)/(Z)x(D) Subsequent installation for already laid cables and pipes possible. Gas- and watertight up to 10 bars. Soundproof. GPD with...