FHE Flexible House Entrance

Product catalog summary

Overview: The document outlines the specifications and applications of the Flexible House Entrance (FHE) system by UGA SYSTEM-TECHNIK. It is designed for gas- and watertight insertion of cables or lines into buildings, featuring a flexible, pressure-resistant plastic spiral hose with expansion seal coating and thermal sleeves.

Specifications: The FHE system is available with thermal sleeves on one or both sides and can be installed using cold shrink-on or roll-on sleeve sealing techniques. It is suitable for a wide range of applications, requiring only a few sizes. The system is resistant to weather and chemicals, with an operational temperature range from -15°C to +60°C. Intermediate sizes up to 325 mm diameter are available upon request.

Installation: Installation is simple and quick, with the system ensuring tightness against walls and inserted cables up to 1 bar. The use of gunning material FHE-Fix and hydraulic jointing compound UGA-KB F1 is recommended for installation. The contractor is responsible for ensuring the tightness of the installation.

Product Variants: The document lists various FHE product designations, detailing the cable diameter ranges and corresponding product codes for both heat shrink-on and cold shrink-on techniques. Standard lengths are 600 mm, with special lengths available.

Technical Data: The document provides technical data for FHE on rolls, including inside and outside diameters, weight, roll length, and type. The minimum bending radius is specified as five times the outside diameter.

Warranty and Liability: UGA SYSTEM-TECHNIK provides replacements for parts impaired due to material faults but not for defects resulting from transport, storage, or faulty processing or installation. Users are advised to test the material themselves due to various possible influences during installation and application.

Catalog excerpts

FHE Flexible House Entrance Simple and quick installation. Tightness towards wall and inserted cables up to 1 bar. Available with thermal sleeve on one or both sides. Also available in cold shrink-on technique or as roll-on sleeve sealing. Big range of applications thus only a few sizes required. Simple replacement of cables. Sealing also possible with multiple groupings. UGA’s system FHE consists of a flexible pressure-resistant plastic spiral hose with expansion seal coating as well as a thermal sleeve on one or both sides for gas- and watertight installation. The UGA FHE spiral hose is a flexible, rough-service, compression-proof plastic spiral hose with a smooth inside consisting of a hard-plastic spiral and a soft-plastic coating.

Open the catalog to page 1

FHE Flexible House Entrance Technical Data FHE Variants product designation product designation in heat shrink-on technique in heat shrink-on technique with thermal sleeve on one side with thermal sleeve on both sides cable Ø FHE from … to inside Ø mm mm product designation in cold shrink-on technique standard length 600 mm - also available in special lengths Gunning Material For installation we recommend our gunning material FHE-Fix (cartouche, contents 310 ml) Hydraulic Jointing Compound UGA-KB F1 (quickly setting, watertight) Spiral Hose as Yard Ware Notes on Installation / Specifications...

Open the catalog to page 2

All UGA System-Technik catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list