BKD 90
1 / 6Pages

Building Technology Systems www.uga.eu Cable- and pipe entries SYSTEM-TECHNIK BKD 90 Bayonet cable entry 24 hour delivery service Global distribution network Service-Hotline Tel. +49 7324 9696-33 we are happy to assist you

Sealing cables in an instant The BKD 90 system from UGA Service-Hotline Tel. +49 7324 9696-33 we are happy to assist you Quick installation due to bayonet catch The bayonet reception of the BKD 90 System allows the quick connection of system covers or cable conduits to the sealing collar. It has never been easier to seal cables. The system covers are delivered with heat shrink-on sleeves TM. Cold shrink-on sleeves KS are available optionally. System cover Sealing collar Advantages of the BKD 90 system • Quick and easy installation • Gas- and watertight immediately • Suitable for heat and...

BKD 90 Bayonet sealing collars Immediately tight and safe Our sealing collars are produced in the length fitting to the wall thickness. Every single sealing collar comes with a gas- and watertight cover. Therefore the inside stays clean during the installation and the sealing collar is gas- and watertight immediately after encasing in concrete. Single sealing collar Suitable for the connection of a system cover or KSS System on one side. Applicable for wall thicknesses from 60 mm. Direction of installation has to be determined! Permanent connection with the concrete The sealing collar is...

BKD 90 bayonet system cover and further connection options One connection, many possibilities A system cover with connection piece, as well as a KSS cable protection system can be connected to the BKD 90 sealing collar. Handling Before running the cables, the system covers and cable protection systems are installed via GSS installation wrench. Unused system cover connection pieces can be sealed with sealing plugs VS and are therefore available as spare ducts for later modifications. Cold or heat shrink-on technology The standard version of our system cover is delivered with heat shrink-on...

Packages Variable arrangement of packages Sealing collars can be plugged together randomly next to each other or on top of the other. Four-finger joint box AK Heat shrink-on technique for sealing four cables in one system cover connection piece. Order no. AK 35-4F-13/2 for system cover BKD90-D3/30 and BKD 90-D5/20 Suitable for cables with an outside diameter from 2 up to 12 mm. Safety at a glance Packages create central check holes which allow subsequent control of the concrete compaction! Three-finger joint box AK Heat shrink-on technique for sealing three cables in one system cover...

Approved tightness The Fraunhofer Gesellschaft Bremen (IFAM) conducted the following tests on the BKD 90 System: • Gas tightness with air at a gauge pressure of 1 bar • Gas tightness with helium at a gauge pressure of 1 bar • Water pressure tightness at a gauge pressure of 5 bar • Water pressure tightness at low temperatures at a gauge pressure of 5 bar and a temperature of -27° • Destruction test The sealing collar was tested in connection with the blind cover as well as the system covers D1/75 and D3/30. Water pressure tightness at low temperatures was tested with system cover D3/30. Test...