*mydirectindustry

YCP series

Product catalog summary

Overview: The document provides technical specifications and details for the Angle Seat Valve with Steel Operator by Uflow Automation, including model identification, dimensions, and material specifications.

Specifications:

Port: Available in BSP/NPT.
End Connection: Options include Screwed, Flange, and Tri-Clamp.
Body Material: SS ASTM A351 Grade CF8/CF8M.
Seal Material: Options include TEFLON, VITON, EPDM, and SILICON.
Temperature Range: Circumstance Temp: -10°C to 70°C; Media Temp: -10°C to 180°C.
Media Compatibility: Suitable for Steam, Air, Water, Chemical, Gases, Oil, Diesel, and Hot Water.

Actuator Specifications:

Cover Material: SS304.
Plate Material: Aluminum Die-Cast.
Working Pressure: 3.5 to 7 bar air (not recommended above 7 bar).
Life Cycle: More than ten million cycles.

Model Dimensions: The document lists dimensions for various models (YCP25 to YCP83) with specific measurements for A, B, C, D, and E in mm.

Technical Data:

Body Material: CF8/CF8M for all models.
Operating Pressure: Min: 0 Kg/cm², Max: 16 Kg/cm².
Seal & O-Ring Material: PTFE, VITON, EPDM.
Flow Factor (Kv): Ranges from 6 to 68 m³/hr depending on the model.

Model Identification Chart: Provides a breakdown of model numbers based on valve position, pressure range, seal material, port size, body material, and port type.

Recommendations: It is recommended to use a filter in the inlet port to ensure optimal performance.

Catalog excerpts

Uflou/ Automation INDIA Automation Simplified... Uflow Automation Ankur Industrial Complex, Survey No: 275/276, Plot No: 31, Nr. Intol Cast Pvt. Ltd. Shapar (Veraval) 360 024. Dist: Rajkot Gujarat (INDIA). Phone No: +91 2827 254343 | Cell: +91 89059 07070 Email: [email protected] | Website: www.uflowvalve.com

Open the catalog to page 1

Port : End Connection : Body Material : Seal : Circumstance Temp : Media Temp: Media : ACTUATOR TYPE Cover : Plate : Working Pressure : Life : Other Technical Data : SS304 Aluminum Die-Cast 3.5 to 7 bar air (Not recommended actuator pressure above 7 bar) More than ten million cycle Available on Request NOTE: Use of filter in the inlet port is recommended. SECTION VIEW TECHNICAL DATA Model No. Material Pipe (Inch) Orifice (mm) Seal & 'O' Ring Material PTFE / VITON /EPDM PTFE / VITON /EPDM PTFE / VITON /EPDM PTFE / VITON /EPDM PTFE / VITON /EPDM PTFE / VITON /EPDM

Open the catalog to page 2