IBV009B

IBV009B

IBV009B

Product catalog summary
Overview: The document provides technical specifications and operational details for a Proportional Flow Control Solenoid Valve by Uflow Automation, designed for precision control in medical applications such as ventilators and anesthesia machines.
Features:
  • Low power consumption with minimal heat generation.
  • Tested for up to 100 million life cycles ensuring reliability.
  • Operates with DC current or pulse width modulation (PWM) with closed-loop feedback for optimal performance.
Applications: The valve is suitable for use in ventilators, anesthesia delivery systems, insufflators, and pressure and flow control systems.
Specifications:
  • Valve Type: 2 Way Proportional
  • Port: 1/8” BARB
  • Body Material: Brass
  • Seal: NBR with optional FKM
  • Media: Air, Oxygen, Nitrous Oxide, Carbon Dioxide, Heliox, and other medical gases
  • Flow Rate: 6 LPM at 10 psi Differential Pressure
  • Operating Environment: 32 to 132°F (0 to 55°C)
  • Storage Temperature: -40 to 158°F (-40 to 70°C)
  • Dimensions: L-17.6mm, W-16mm, H-45mm
  • Weight: 58 g
Electrical Characteristics:
  • Power: 9V DC (2 Watts)
  • Electric Termination: 15” Lead Wire
Performance Characteristics:
  • Leak Rate: <0.2 sccm of helium (bubble tight)
  • Operating Pressure: 0 to 30 psi
  • Orifice Sizes: 0.8mm
  • Hysteresis: 7% of full scale current (Typical), 15% (Max)
  • Response Time: 10 ms Typical
  • Reliability: 100 Million Cycles, 0.95 Reliability Factor
Wetted Materials: Brass, 430 FR Stainless Steel, NBR/FKM, Aluminum (Manifold)
Control Recommendations:
  • Current control is recommended for repeatable valve flow performance.
  • PWM control should have a frequency of 5 kHz or greater.
Model Identification: The document includes a model identification chart for selecting valve configurations based on body material, seal material, port size, pressure, orifice, and plunger specifications.
Note: For customized configurations, contact the factory with specific requirements such as media, pressures, temperature range, flow rate, and system supply voltage.
See more

Catalog excerpts

IBV009B-1

PROPORTIONAL FLOW CONTROL SOLENOID VALVE Uflow Automation Ankur Industrial Complex, Survey No: 275/276, Plot No: 31, Nr. Intol Cast Pvt. Ltd. Shapar (Veraval) 360 024. Dist: Rajkot Gujarat (INDIA). Phone No: +91 2827 254343 | Cell: +91 89059 07070 Email: [email protected] | Website: www.uflowvalve.com

 Open the catalog to page 1
IBV009B-2

Proportional flow control valve, integral to the design of an inspiratory flow system, provides precision control for the flow of gas. Specialized proportional valves are available for application in ventilators and anesthesia machines and provide accurate and safe delivery of precise gases to patients. APPLICATIONS Ventilators Anesthesia Delivery & Monitors Pressure and Flow Control FEATURES Low power consumption generates less heat Proven performance tested to 100 million life cycles Uses either DC current or pulse width modulation with closed loop feedback to deliver optimal system performance....

 Open the catalog to page 2
IBV009B-3

BODY BASIC VALVE DIMENSIONS ELECTRICAL REQUIREMENTS Nominal Supply Voltage (VDC) Nominal Coil Resistance (Ohms) @ 20°C Control Current at Maximum Flow (mA) BASIC CONTROL: proportional valve can be controlled by either voltage or current; however, it is highly recommended that current control be employed to ensure the most repeatable valve flow performance. SUGGESTED PWM CONTROL: For PWM control, the signal applied to the valve should have a frequency of 5 kHz or greater. Optimal frequency will be application dependent. Valve Solenoid Valve Supply Voltage BODY BASIC VALVE DIMENSIONS OPAMP Supply...

 Open the catalog to page 3
IBV009B-4

PROPORTIONAL FLOW CONTROL VALVE MODEL IDENTIFICATION CHART I PRESSURE & ORIFICE SEAL MATERIAL PORT TYPE BODY MATERIAL PORT SIZE MANIFOLD MOUNTING Note: Above mentioned pressure is a differential pressure. IBV009B PROPORTIONAL FLOW CONTROL VALVE 30PSI / 0.8 MM ORIFICE ⅛” BARB PORT BRASS BODY (5MM)

 Open the catalog to page 4

All UFLOW AUTOMATION catalogs and technical brochures

  1. SCA series

    2  Pages

  2. ACA series

    2  Pages

  3. SFA series

    2  Pages

  4. AFA1 series

    2  Pages

  5. PFA series

    2  Pages

  6. LFA series

    2  Pages

  7. SFA1D series

    2  Pages

  8. AFA1D series

    2  Pages

  9. STA series

    2  Pages

  10. ATA series

    2  Pages

  11. PTA series

    2  Pages

  12. LTA series

    2  Pages

  13. STA1D series

    2  Pages

  14. ATA1D series

    2  Pages

  15. Poppet Valve

    2  Pages

  16. Full Catalogue

    28  Pages

  17. IBV / MAX

    4  Pages

  18. IBV / NC

    4  Pages

  19. AD /AS series

    4  Pages

  20. UCV series

    2  Pages

  21. BCP series

    3  Pages

  22. JAN series

    3  Pages

  23. PCN series

    3  Pages

  24. DCV series

    2  Pages

  25. ACP series

    5  Pages

  26. YCP series

    3  Pages

  27. GW series

    3  Pages

  28. TBN series

    3  Pages

  29. DAN series

    3  Pages

  30. PBN series

    3  Pages

Archived catalogs

  1. DCN series

    4  Pages

  2. IBV19M

    4  Pages

  3. HCP series

    3  Pages

  4. TFA series

    4  Pages

  5. MBN series

    3  Pages

  6. TFA1R

    3  Pages

  7. TFA1

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.