Specifications:
- Port: Screwed
- End Connection: Not specified
- Body Material: Aluminum Pressure Die Cast
- Diaphragm: Nitrile (NBR)
- Media Temperature: -10°C to 60°C
- Circumstance Temperature: -30°C to 70°C
- Media: Air, Natural Gas, Town Gas
- Main Features: Flow adjustment, Opening time adjustment, Quick release initial flow adjustment, High reliability unaffected by voltage surges, Easy coil changes
- Operating Voltage: 110AC, 230AC, 12DC, 24DC
- Power Consumption: 30W
- Coil Features: Epoxy square coil, lockable in 4X90 position
- Coil Housing: Available on request
- Other Specifications: Use of filter in the inlet port is recommended

Technical Data:
- Model No.: DAN213, DAN408
- Body Material: Aluminium
- Min. Operating Pressure: 0 mbar
- Max. Operating Pressure: 500 mbar (DAN213), 350 mbar (DAN408)
- Seal & Diaphragm Material: NBR
- Flow Factor Kv: 4 m³/hr (DAN213), 13 m³/hr (DAN408)
- Pipe Size: ½” (DAN213), 1” (DAN408)
- Orifice: 15 mm (DAN213), 30 mm (DAN408)

Compliance:
- Coils conform to IEC-60335-1 with derivatives (LVD / EMC)
- Gas Solenoid Valve complies with EN-161 requirements

Model Identification Chart:
- Type: Various types including Pilot Operated, Semi Lift, Pulse Jet, etc.
- Seal Material: Options include Nitrile, EPDM, Viton, etc.
- Pressure Range: Various ranges from 0 - 350 mbar to 1.5 - 40 bar
- Body Material: Options include Aluminium, Brass, Nylon, etc.
- Port Size: Ranges from ⅛” to 6”
- Port Connection: BSP, NPT, Tri-Clamp, Customized
- Mounting: Flange
- Plunger Diameter: Various sizes
- Valve Position: Normally Closed (NC), Normally Open (NO), Manually Override