*mydirectindustry

ACP series

Product catalog summary

Specifications
The angle seat valve with a plastic actuator is designed for various applications, including steam, air, water, chemicals, gases, oil, diesel, and hot water. It is available in normally closed, open, or double-acting configurations. The valve features a port with end connections that can be screwed, flanged, or tri-clamped. The body and sleeve are made from SS ASTM A351 Grade CF8/CF8M, with seals available in TEFLON, PEEK, VITON, or EPDM. The shaft is constructed from SS304 or SS316. The valve operates within a circumstance temperature range of -10°C to 70°C and a media temperature range of -10°C to 180°C. A filter is recommended for the inlet port.

Actuator Type
The actuator cover is made from nylon glass-filled material with a stainless steel liner, offering corrosion resistance. Seals are available in NBR or VITON. The actuator is tested for three million cycles and can be converted from single acting to double acting. It supports multiple functions with the same operator, including normally closed (NC), normally open (NO), and bi-directional operations. The operator is rotatable 360°, and a transparent dome provides visual indication of valve status. Lubricated air is not essential for operation.

Features
The valve is suitable for high-temperature and high-viscosity media, even under zero differential pressures. It is robust and has a high cycle life, making it a reliable alternative to ball valves and solenoid valves, especially in applications with contaminated or viscous media. The valve can be operated using a single or double acting configuration, affecting its pressure rating.

Technical Data
The valve is available in various sizes, with flow factors (Kv) ranging from 6 to 120 m³/hr, depending on the size. The orifice sizes range from 14.50 mm to 65 mm. The pressure chart provides details on line and pilot pressures for different configurations and sizes.

Model Identification
The model identification chart provides details on product type, port type, seal material, port size, actuator size, type, flow direction, body material, and pressure ratings. An example model, ACP456FZB, is a 1” angle seat valve with a Ø63 NAMUR plastic actuator, flange connection, and a pressure rating of 0-16 bar, normally open below the plug.

Mounting Valve Information
Various models are available with different configurations, including weatherproof and flameproof options, with different voltage and power consumption specifications.

Catalog excerpts

(Normally Close / Open / Double Acting) Uflou/ Automation INDIA Automation Simplified... Uflow Automation Ankur Industrial Complex, Survey No: 275/276, Plot No: 31, Nr. Intol Cast Pvt. Ltd. Shapar (Veraval) 360 024. Dist: Rajkot Gujarat (INDIA). Phone No: +91 2827 254343 | Cell: +91 89059 07070 Email: [email protected] | Website: www.uflowvalve.com

Open the catalog to page 1

Angle seat valves are 2/2 way pneumatically actuated piston valves. The piston actuator provides a linear motion to lift the seal off its seat. Because the seat is positioned under an angle, the flow is minimally impeded in the open position, resulting in an excellent flow rate and a low pressure loss. They are used to regulate the flow of liquids, gases, steam, vacuum and even aggressive fluids. They can also operate with high temperatures and high viscosity media, even under zero differential pressures. The robust design makes UFLOW angle seat valves a popular choice for harsh applications...

Open the catalog to page 2

Model No. Actuator Port Diagram A Size No. DIMENSION WITH TRI-CLAMP All dimensions are in mm Model No. Actuator Port Dia?ram A TECHNICAL DATA Pipe (Inch) Body Material Seal & 'O' Ring Material PTFE / PEEK / VITON PTFE / PEEK / VITON PTFE / PEEK / VITON PTFE / PEEK / VITON PTFE / PEEK / VITON PTFE / PEEK / VITON PTFE / PEEK / VITON PRESSURE ABOVE PLUG PRESSURE BELOW PLUG IN

Open the catalog to page 3

PRESSURE CHART Pipe (Inch) ANGLE SEAT VALVE PLASTIC ACTUATOR MODEL IDENTIFICATION CHART A PRODUCT ANGLE SEAT VALVE PLASTIC ACTUATOR SEAL MATERIAL PORT SIZE PRESSURE BODY MATERIAL PORT TYPE FLOW DIRECTION ACP456FZB 1” ANGLE SEAT VALVE 063 NAMUR PLASTIC ACTUATOR WITH FLANGE 0-16 BAR NORMALLY OPEN (BELOW PLUG) TYPE Blank

Open the catalog to page 4

Pressure Port Connection Body Material Seat Seal 10 bar 1/4" BSP Aluminium Hard Anodised NBR / VITON / EPDM Voltage (V) +10%, -10% Power Consumption Cable Entry NOTE: Contact The Uflow For Any Other Combinations

Open the catalog to page 5

ACP series

ACP series

Catalog excerpts

All UFLOW AUTOMATION catalogs and technical brochures

Archived catalogs