Catalogs >
UFI HYDRAULIC >
sc_heavy

sc_heavy
5Pages

Catalog excerpts

COMPONENTS SUCTION F I LT E R S SC HEAVY SERIES MATERIALS SC51 & SC61 Housing: Steel Cover: Aluminium Shut-off valve: Polyammide Seals: NBR Nitrile (FKM - on request uoroelastomer) Indicator housing: Brass PRESSURE (ISO 10771-1:2002) Collapse, differential for the lter element (ISO 2941): 100 kPa (1 bar) WORKING TEMPERATURE From -25° to + 110° C APPLICATION EXAMPLE COMPATIBILITY (ISO 2943:1999) Full with uids: HH-HL-HM-HV-HTG (according to ISO 6743/4) For uids different than the above mentioned, please contact our Sales Department.

Open the catalog to page 1

S U C T I O N F I LT E R S ORDERING AND OPTION CHART S C TYPE F = FILTER COMPLETE B = FILTER HOUSING F B 51 F PORT TYPE F = SAE flange 3000 psi PORT SIZE 24 = 3" 61 F FAMILY, NOMINAL SIZE & LENGTH F B F 24 - - SEALS W N F W BYPASS VALVE W = without 32 W 32 = 4" ELEMENT FAMILY SIZE & LENGTH N F N = NBR Nitrile F = FKM Fluoroelastomer G = treatment for water-glycol G G FILTER MEDIA ME = metal wire mesh 60 m MF = metal wire mesh 90 m MG = metal wire mesh 250 m ME MF MG ME 04 10 01 10 W W W SEALS W CLOGGING INDICATOR 01 = 1/8" port , plugged 04 = nr. 2 x 1/8" seats, plugged 10 = vacuum gauge,...

Open the catalog to page 3

SC S U C T I O N F I LT E R S HEAVY SERIES FLUID SPEED when selecting the lter size, we suggest to consider also the max recommended fluid speed (in suction lines normally 0,1< v < 1 m/s) 600 Recommended range 550 500 [l/min] 400 FLOW RATE 450 300 0,1< v < 1 m/s 350 250 200 150 100 50 0 3” 4” PORT SIZE PRESSURE DROP CURVES (∆p) The “Assembly Pressure Drop (∆p)” is obtained by adding the pressure drop values of the Filter Housing and of the Clean Filter Element corresponding to the considered Flow Rate and it must be lower than 3 kPa (0,03 bar). FILTER HOUSING PRESSURE DROP (mainly depending...

Open the catalog to page 4

S U C T I O N F I LT E R S CLOGGING INDICATOR A visual or electrical indicator allows monitoring of the element condition. The port for the indicator is a standard feature. MAGNETIC CORE The optional magnetic core is an additional safeguard that prefilters magnetic particles. EASY MAINTENANCE Operated by a hexagonal cover stud the shut-off valve isolates the tank oil allowing easy element replacement without emptying the reservoir. SC HEAVY SERIES FAST REPLACEMENT Loosening four screws will allow removal of quick release cover and replacement element. CLOGGING INDICATOR For further...

Open the catalog to page 5