SA & SB MATERIALS Connector: Polyammide (Aluminium for ESA & ESB 51 - 52) End cap: Polyammide (Zinc plated steel for ESA & ESB 51 - 52) Bypass valve: (SA) Polyammide Magnetic core: (SB) Syntherized magnetic material PRESSURE (ISO 10771-1:2002) Collapse, differential: 100 kPa (1 bar) BYPASS VALVE Setting: 30 kPa (0,3 bar) ± 10% APPLICATION EXAMPLE WORKING TEMPERATURE From -25° to +110° C COMPATIBILITY (ISO 2943:1999) Full with fluids: HH-HL-HM-HV-HTG (according to ISO 6743/4) For fluids different than the above mentioned, please contact our Sales Departm

INSTALLATION DRAWING SUCTION STRAINERS FAMILY, NOMINAL SIZE & LENGTH PORT TYPE FILTER MEDIA ME = metal wire mesh 60 m MF = metal wire mesh 90 m MG = metal wire mesh 250 m E FILTER ELEMENT FILTER ELEMENT S B FAMILY, NOMINAL SIZE & LENGTH D1 PORT TYPE

FAMILY, NOMINAL SIZE & LENGTH PORT TYPE ORDERING AND OPTION CHART W = without A = 30 kPa (0,3 bar) FILTER MEDIA ME = metal wire mesh 60 m E1 MF = metal wire mesh 90 m MG = metal wire mesh 250 m SUCTION STRAINERS WITH MAGNET03 - FAMILY, NOMINAL SIZE & LENGTH PORT TYPE B = BSP thread N = NPT thread PORT SIZE 03 = 3/8" 04 = 1/2" 06 = 3/4" 08 = 1" 10 = 1" 1/4 32 = 4" X BYPASS VALVE X = without FILTER MEDIA ME = metal wire mesh 60 m MF = metal wire mesh 90 m MG = metal wire mesh 250 m

FLUID SPEED when selecting the filter size, we suggest to consider also the max recommended fluid speed (in suction lines normally 0,1< v < 1 m/s) 550 Recommended range FLOW RATE PORT SIZE PRESSURE DROP CURVES (∆p) The Pressure Drop (∆p) must be lower than 3 kPa (0,03 bar). Δp (bar Δp (kPa) ) N.B. All the curves have been obtained with mineral oil having a kinematic viscosity 30 cSt and specific gravity 0,9 kg/dm3; for fluids with different features, please consider the factors described in the first part of this catalogue. All the curves are obtained from test done at the UFI HYDRAULIC DIVISION Laboratory,...