COMPONENTS PRESSURE F I LT E R S PA MATERIALS Housing: Anodized aluminium alloy Bypass valve: Brass Seals: NBR Nitrile (FKM - on request uoroelastomer) Indicator housing: Brass PRESSURE (ISO 10771-1:2002) Max working: 11 MPa (110 bar) Test: 16 MPa (160 bar) Bursting: 30 MPa (300 bar) Collapse, differential for the lter element (ISO 2941): 8 MPa (80 bar) APPLICATION EXAMPLE BYPASS VALVE Setting: 600 kPa (6 bar) ± 10% WORKING TEMPERATURE From -25° to +110° C COMPATIBILITY (ISO 2943:1999) Full with uids: HH-HL-HM-HV-HTG (according to ISO 6743/4) For uids different than the above mentioned, please contact our Sales Department.

P R E S S U R E F I LT E R S ORDERING AND OPTION CHART TYPE F = FILTER COMPLETE B = FILTER HOUSING F F B 11 12 B = BSP thread N = NPT thread S = SAE thread B N S B N S 04 = 1/2" 04 04 W C W C N = NBR Nitrile F = FKM Fluoroelastomer N F N F FILTER MEDIA FA = fiber 5 m(c) >1.000 FB = fiber 7 m(c) >1.000 FC = fiber 12 m(c) >1.000 FD = fiber 21 m(c) >1.000 CC = cellulose 10 m >2 P A B FA FB FC FD CC FA FB FC FD CC 03 5E 6E 7E T2 03 5E 6E 7E T2 XX XX FAMILY NOMINAL SIZE & LENGHT PORT TYPE 0 4 PORT SIZE BYPASS VALVE W = without C = 600 kPa (6 bar) SEALS CLOGGING INDICATOR 03 = port, plugged 5E = visual...

PA P R E S S U R E F I LT E R S FLUID SPEED when selecting the lter size, we suggest to consider also the max recommended uid speed (in pressure lines normally 5 < v < 10 m/s) 200 150 100 5 < v < 10 m/s FLOW RATE [l/min] Recommended range 50 0 1/2” PORT SIZE PRESSURE DROP CURVES (∆p) The “Assembly Pressure Drop (∆p)” is obtained by adding the pressure drop values of the Filter Housing and of the Clean Filter Element corresponding to the considered Flow Rate and it must be lower than 80 kPa (0,8 bar). FILTER HOUSING PRESSURE DROP (mainly depending on the port size) Δp (bar) Δp (kPa) 1 0,75 75...

P R E S S U R E F I LT E R S CLOGGING INDICATOR A visual or visual-electrical differential indicator is available as an option and allows monitoring of the element conditions, giving an exact indication of the right time to replace the element. CLOGGING INDICATOR For further technical informations and other options see page 182-183. FILTER HOUSING Head and bowl are made by high performance aluminium alloy ensuring the best fatigue resistance. FILTER ELEMENT The filter element is manufactured with filter medias selected in the UFI laboratory and mechanically supported to maintain the highest performance...