4CastBearing Condition Monitoring SystemSave time, save your bearings and improve plant reliability C \ Review bearing information from the convenience of your office Monitor bearing condition 24/7 and tell 4Cast when to send a report. This unique, system continuously logs bearing data and bearing sounds. At pre-set intervals, all stored data and sound samples are sent to a computer for reporting and analysis. How often do you want 4Cast to sample a bearing? System flexibility allows users to pre-set how often a bearing will be tested: by the minute, hour, day, etc. Customize your report intervals Data and sound recording transfer rates are customizable so that while the data are routinely recorded on the 4Cast box, a report containing only the latest information will be sent to Ultratrend DMS (UE Systems data management analysis and reporting program) via your existing Ethernet network. Reporting frequency can be set by the user (for example, once a week, month or year).

Set your alarm levels Specifications Case Alarm levels can be set to provide a low alarm and a high alarm. Analyze how and why the alarm went off Utilizing the power of airborne ultrasound, there is no contact with the electrical components of the equipment being monitored, making installation safer and easier. 1. When a set alarm level is reached or exceeded, the system will send previously logged data and recorded sounds directly to Ultratrend DK/IS 2. After an alarm has been addressed, all data and sound recordings stored during the alarm period can be set to transfer to the computer for more...