Inks “Our inks have been created and designed by our chemical engineers as a perfect match for our high resolution and thermal inkjet printers, so that they not only achieve the best quality and resolution in the marking, but also optimize consumption.” Water based & Solvent Based Formulations according to Regulations EuPIA, REACH, CLP and Swiss regulatory Scentless inks No VOC (Volatile Organic Compounds), are Organic Compounds that are easily converted into Vapors or Gases Water based Without NVC (T; R48 / 23 Toxic by inhalation and possible cause of respiratory tract damage Recommended use 0% in inks and varnishes) Without ITX (Initiator photo prohibited according to FDA regulation because of possible contamination of food by migration) No PYRROLIDONES (Cyclic Resin that could cause Cancer) Optimized stability of viscosity and surface tension parameters Maximum Contrast in colorimetry Low migration (Printing on food product packaging) Developed without glycerin and dispersants of animal origin The Oil Based formula is ECO free of mineral oils and meets the requirements of FEFCO for the recycling of corrugated board RHEOLOGIA common OIL and UVLED that leads to unified mechanical behavior (Viscoelasticity, Surface tension, Deformation, Temperature) European Printing Association Registration, Evaluation, Authorisation and restriction of Chemicals Swiss ordinance on materials/articles in contact with food (Annex.6th)

Better quality, higher resolution and optimization in consumption OIL BASED INK BOTTLES COLORS Black, red, blue and green (Others available upon request) PRINTED MATERIALS All types of porous substrate DRYING TIME STORAGE CONDITIONS From + 10 ° C to + 35 ° C in dry and clean environment UV BASED INK BOTTLES COLORS Black, red, blue and green (Others available upon request) PRINTED MATERIALS DRYING TIME STORAGE CONDITIONS From + 10 ° C to + 35 ° C in dry and clean environment CARTRIDGES HP 2.5 FOR WATER BASE INK AND SOLVENT BASED INK COLORS Black. (Others available upon request) PRINTED MATERIALS...