Korean?certified IP Sensors
Korean?certified IP Sensors
The Series 9000 IP range of Korean-certified sensors are precision ultra-wideband (UWB) measurement devices. They utilize an array of antennas and UWB radio receivers to detect UWB pulses from Ubisense tags, enabling the Ubisense location system to determine tag positions within 15cm in 3D.
Ubisense employs a cellular architecture to scale installations from small to large areas by tiling them with 'cells' of sensors. Thousands of sensors can be integrated into a single system to monitor extensive areas and manage numerous tags. The infrastructure cost can be adjusted based on location accuracy requirements.
Sensors operate within an Ethernet environment using standard network infrastructure, such as Ethernet switches and Wi-Fi access points. They can be powered via Power-over-Ethernet switches.
- Dimensions: IP30 (20cm x 14cm x 6.5cm), IP54 (20cm x 14cm x 9.5cm), IP65 (21cm x 14cm x 9.5cm)
- Weight: IP30 (580g), IP54 (700g), IP65 (730g)
- Temperature: 0°C to 60°C
- Humidity: 0 to 95%, non-condensing
- Enclosure: IP30/IP54/IP65, ABS/PC (V0), UV Stabilized
- Radio frequencies: UWB channel (8.5 - 9.5GHz), Telemetry channel (2.4GHz)
- Certifications: Korea KCC mark
- Power supply: Power-over-Ethernet IEEE 802.3af compatible, optional 12V DC input
The system maintains location accuracy in cluttered, multipath-rich environments using UWB technology. It measures both Angle-of-Arrival (AoA) and Time-Difference-of-Arrival (TDoA) of tag signals, providing accurate 3D tracking even with minimal sensor detection.
Each sensor can sustain an update rate of up to 134Hz, providing tag location updates every 7.5ms.
The sensors support two-way control and telemetry communications with Ubisense tags over a 2.4GHz radio, allowing dynamic management of tag update rates, feedback via tag LEDs, and wireless reprogramming of tags.
Sensors are remotely administered over the Ethernet network, with firmware updates downloadable over the network.
There are three IP rated sensor variants: IP30 for normal indoor use, IP54 for indoor or outdoor use with moderate protection, and IP65 for extreme outdoor environments requiring high protection against elements.
Catalog excerpts
Specifications Dimensions: IP30: 20cm x 14cm x 6.5cm (8.0” x 5.5” x 2.6”) IP54: 20cm x 14cm x 9.5cm (8.0” x 5.5” x 3.7”) IP65: 21cm x 14cm x 9.5cm (8.3” x 5.5” x 3.7”) Weight: IP30: 580g (20 oz.) IP54: 700g (25 oz.) IP65: 730g (26 oz.) Temperature: 0°C to 60°C (32°F to 140°F) Humidity: 0 to 95%, non‐condensing Enclosure: Design protection level IP30/IP54/IP65 ABS/PC (V0), UV Stabilized Radio frequencies: Ultra‐wideband channel: 8.5 ‐ 9.5GHz Telemetry channel: Narrow‐band 2.4GHz Certifications: Korea: KCC mark KCC ID UB9‐UBISENSOR9020IP Power supply: Power‐over‐Ethernet IEEE 802.3af compatible DC input (12V DC @ 1A, optional) Mounting options: Adjustable mounting bracket (supplied) Ubisense part codes: UBISENSOR9020IP30 (Series 9000 IP30 Sensor) UBISENSOR9020IP54 (Series 9000 IP54 Sensor) UBISENSOR9020IP65 (Series 9000 IP65 Sensor) UBISENSPS (Optional 12V power supply) UBISENBRKT (Additional mounting bracket) OVERVIEW The Series 9000 IP range of Korean‐certified sensors are precision ultra‐wideband (UWB) measurement devices, containing an array of antennas and ultra‐wideband radio receivers. The sensors detects UWB pulses from Ubisense tags, allowing the Ubisense location system to find the tag’s positions to within 15cm* in 3D. FLEXIBLE AND SCALABLE INSTALLATIONS Ubisense uses a cellular architecture to scale from small to very large installations ‐ large areas are covered by tiling them with ‘cells’ consisting of a small number of sensors working together. Thousands of sensors can be integrated into a single enterprise wide system to monitor an unlimited area and manage thousands of tags. Sensors can be connected together in a variety of ways, allowing infrastructure cost to be traded off against location accuracy in accordance with application requirements. STANDARD NETWORKING Sensors operate within a Ethernet environment, using standard network infrastructure, such as Ethernet switches, Wi‐Fi access points and Cat5e structured network cabling for communication between sensors and servers. Sensors can be powered over the network cabling using Power‐over‐Ethernet switches. © 2014 Ubisense. All Rights Reserved. Series 9000 Korean‐certified IP Sensors Fact Sheet, Rev 4 EN‐140307 *Dependent on system configuration and environment.
Open the catalog to page 1
By using UWB technology, the system’s location accuracy is maintained even in cluttered, multipath‐ rich indoor environments. The Ubisense UWB location system is the only one capable of measuring both Angle‐of‐Arrival (AoA) and Time‐Difference‐of‐Arrival (TDoA) of tag signals, enabling it to generate accurate 3D tracking information even when only two sensors can detect the tag. This reduces the infrastructure requirements for an installation, minimizing costs whilst dramatically improving the reliability and robustness of the system. Sensors are administered remotely over the Ethernet network....
Open the catalog to page 2All Ubisense catalogs and technical brochures
Series 7000 Industrial Tag2 Pages
myWorld inside - telecoms2 Pages
myWorld - telecoms2 Pages
IT Requirements1 Page
Virtual Station1 Page
Operations Centre2 Pages
Process Improvement2 Pages
Explorer1 Page
Smart Factory Offline2 Pages
RTLS Hardware2 Pages
Research Package2 Pages
