NV-BM600CFX

NV-BM600CFX
1 / 37 PagesView full catalog

NV-BM600CFX

Product catalog summary
Product Disclaimer
U-Reach disclaims liability for damages from product use, including data loss or business interruptions. Customers must ensure product output meets quality requirements. Specifications may change without notice.
Warranty
A one-year warranty covers parts and labor, excluding consumables. Extended warranties are available. Support is provided for the product's defined life.
Piracy Statement
U-Reach is not responsible for copyright infringement. Users must ensure legal compliance when copying data.
Before You Start
Read the manual thoroughly before use. Ensure source and target devices have equal capacity. Use approved power sources and operate in a clean, dry environment. Avoid static electricity and ensure proper grounding.
Functions Table
  • Copy: Copies data from a source port or internal storage.
  • Compare: Verifies data bit-by-bit.
  • Copy+Compare: Automates copying and verification.
  • Erase: Offers Quick, Full, DoD, and Secure Erase options.
  • Utility: Displays device info, updates firmware, and calculates CRC64.
  • Setup: Configures startup menu, copy settings, language, and advanced options.
  • Log Manager: Outputs log data and manages log settings.
  • Image Manager: Manages images on internal SSD.
Product Overview
The NV-BM600CFX features a front view with CFX socket, LED status indicators, control buttons, and an LCD display. The back view includes USB ports, power input, and a grounding port.
Functions
  • Copy: Connect source and target devices, select the source, and start copying. The LCD displays progress and results.
  • Compare: Select the source to verify data from and start the process.
  • Copy+Compare: Automates the copy and verification process.
1. Introduction
This document provides detailed instructions for operating a data duplicator, including data erasure, system updates, and device management. Users are advised to back up important data as the manufacturer is not responsible for data loss.
2. Erase Functions
Several erasure modes are available:
  • Quick Erase: Erases the index table of connected devices.
  • Full Erase: Complies with NIST 800-88 standards to erase all data.
  • DoD Erase: Follows DoD 5220.22-M standards for data erasure.
  • DoD EraseComp: Erases and verifies data per DoD standards.
  • Secure Erase: Targets non-loadable areas as per NIST 800-88 standards.
3. Utility Functions
This section includes:
  • Show Device Info: Displays basic device information.
  • Update System: Firmware updates via USB or source port.
  • System Info: Displays system information.
  • Burn SSD Firmware: Updates firmware for compatible SSDs.
  • Calc. CRC64: Calculates CRC64 value for data verification.
4. Setup Options
Includes various settings for device operation:
  • Start-up Menu: Select default function post-initialization.
  • Copy Area: Offers five copy methods including System and Files, All Partitions, Whole Device, Percentage, and Deep Analysis.
  • Copy GPT Backup Area: Allows copying from larger to smaller devices by ignoring GPT backup.
  • Skip Bad Sectors: Configures how to handle bad sectors during copy/compare.
  • Language: Selects interface language.
  • Advanced Setup: Fine-tunes copy and erase functions, including handling unknown formats, erasing patterns, and HPA settings.
5. Log Manager
Provides access to logs and related submenus for managing device operations.
Log Report Management
  • The Log Report Management Tool monitors, records, and manages the duplication process, providing detailed information for each port to identify slow devices and maintain efficiency.
  • Logs can be exported via USB in three ways: Today's Log Report, Recent Log Report (1-28 days), and Custom Log Report for a specific period.
Exporting Log Reports
  • Ensure the USB is formatted to FAT16/FAT32.
  • Use the menu options to export logs: 'Out Today Report', 'Out Recent Report', and 'Out Period Date'.
  • Advanced functions include clearing logs, setting passwords, adjusting time/date, and adding watermarks to log files.
Image Management
  • Manage image files stored in the internal SSD with functions like copying, comparing, displaying, renaming, and deleting images.
  • Ensure the SSD is securely locked during operations to prevent data loss.
Creating and Uploading GOB Images
  • Use the GOB Compiler to create images in three modes: System and Files, Whole Device, and Depth Profiling Analysis.
  • Upload GOB images to the PCIE duplicator using the GOB Uploader application.
  • Ensure the source device is clean to avoid large file sizes and potential data errors.
Advanced Functions
  • Access advanced functions by connecting the PCIE duplicator to a computer and using the GOB Uploader application with a password.
  • Functions include formatting the internal SSD and enabling AutoCopy.
Notes and Cautions
  • Always back up important data before formatting the SSD.
  • Ensure only one duplicator is connected at a time to avoid errors.
See more

Catalog excerpts

NV-BM600CFX-1

NV-BM600CFX Duplicator and Sanitizer User Manual v A.01

 Open the catalog to page 1
NV-BM600CFX-3

Product Disclaimer U-Reach is not accountable for any incidental or consequential damages, including, but not limited to property harm, loss of time or data from use of any U-Reach product, or any other damages attributable to product malfunction or failure of including without limitation, those attributed to reliance of the materials provided, costs of product replacement, loss of use, data or profits, delays or business interruptions, any principle of legal responsibility arising from or in reference to the use, overall performance, delays in servicing, or lack of ability to render service...

 Open the catalog to page 3
NV-BM600CFX-4

Important Notice • Carefully read the entire manual before operating. • Make sure the source device is correct and functioning. • Equal capacity of source and target is recommended for guaranteed data consistency. • Using the Copy+Compare function provides the most flawless duplication. • Damage incurred due to non-compliance with U-Reach operating instructions will void the warranty. • Store the equipment safely when not in use and keep out of the reach of children. • Please turn off duplicator before replacing sockets. • Never turn off the power while the firmware updates. • Use only approved,...

 Open the catalog to page 4
NV-BM600CFX-7

Skips bad sectors during Copy/Compare. Sets preferred language: English, Japanese, Spanish.

 Open the catalog to page 7
NV-BM600CFX-8

Reinstates manufacturer settings. Outputs today's log data. Outputs recent log data. Outputs a set period of log data. 6.6.9 Stop Motor Time Sets device power down buffer time prior to device disconnection. 7.4.1 Clear All Logs Clear all log records. 7.4.2 Setup Password Allows password change. Change time and date. Creates watermark on the log report.

 Open the catalog to page 8
NV-BM600CFX-10

Front View LED Status (Yellow: Powered, Green: Pass, Red: Fail) CFX Socket Port 1: Source Port Control Buttons SSD slot for saving Master Image. LCD Display USB port for Log Report Outputs and Firmware Updates. Back View Grounding Port Power Input Power Switch

 Open the catalog to page 10
NV-BM600CFX-11

Number of Target Device Total Size The slowest Device Time elapsed and copy progress Backward Copied processed size

 Open the catalog to page 11
NV-BM600CFX-12

Recommendation: Target device(s)' capacity must be equal to or larger than the source device capacity. Scroll to select "1. Copy", then press "OK" to select which source to copy from. Scroll to select "1.1 Source Port" or select "1.2 Internal Storage", then press "OK" to start the duplication process. The number of working/connected targets will be displayed on LCD. Press "OK" to start. The following information below states what is displayed on the LCD during duplication. Function Total Data Copied Slowest Copied Time & % Port Data Press ▲▼ together for 5 seconds to stop operation on the slowest...

 Open the catalog to page 12
NV-BM600CFX-13

1.2 Internal Storage (Available when internal SSD is installed) Scroll to select “1. 2 Internal Storage”, then press “OK” to select which GOB Image to copy from the duplicator’s built-in storage device. The GOB Image is created through U-Reach’s proprietary software that is included with the duplicator. 1. When “1.2 Internal Storage” is selected, the 1st port becomes a target port automatically (e.g. NV-BM600 will become 1-6 duplicator). Please use the Caution duplicator carefully as the manufacturer will not held responsible for any data loss. 2. The GOB Image (internal storage) will not copy...

 Open the catalog to page 13
NV-BM600CFX-14

Scroll to select "3. 1 Source Port", then press "OK" to copy to and verify targets from the source port. 3.2 Internal Storage (Available when InternalSSDIs Installed) Scroll to select "3. 2 Internal Storage" , then press "OK" to select which GOB Image to copy and verify from the duplicator's built-in storage device. The GOB Image is created through U-Reach's proprietary software that is included with the duplicator. Scroll to select "4. Erase", then press "OK" to view the 6 submenus. This function will erase the index table from the connected device(s). Scroll to select "4.1 Quick Erase", then...

 Open the catalog to page 14
NV-BM600CFX-15

4.3 DoD Erase This function will erase all data per DoD 5220.22-M Standards of the connected device(s). Scroll to select “4.3 DoD Erase”, then press “OK” to start the erasing process. 4.4 DoD EraseComp This function will erase all data per DoD 5220.22-M Standards, then verifies the erasure of the connected device(s). Scroll to select “4.4 DoD EraseComp”, then press “OK” to start the erasing and verification process. 4.5 Secure Erase This function erases the non-loadable areas complying with NIST 800-88 Standards. Scroll to select “4.5 Secure Erase “, then press “OK” to start the erasing process....

 Open the catalog to page 15
NV-BM600CFX-16

Connect USB drive to the USB port in front of the duplicator. Scroll to select “5.2.1 Update BIOS”, then press “OK” to start the firmware update process. The firmware update process may take longer than 5 minutes. Please do not Caution disrupt power or process during BIOS update. If interrupted, the system will become useless. We will not be held responsible for any damages. ➋ Through Source port. Step 1: Prepare a device for update. Connect a device to the source port. Scroll to select "5.2.2 Create Update HDD”, then press "OK" to start the format process. This will format the device to a 2GB...

 Open the catalog to page 16
NV-BM600CFX-17

Step 1: Prepare a USB drive for update. Connect a USB drive to PC. Locate the desired BIOS file and save it to the root directory of the USB drive. Note The USB’s format must be: FAT16 or FAT32. Step 2: Proceed to update firmware Connect USB drive to the USB port on the front side of the duplicator. Scroll to select “5.4.2 Burn FW -> SSD Slot1” or “5.4.5 Burn FW -> ALL Slot”, then press “OK” to start the firmware update process. The firmware update process may take longer than 5 minutes. Please do not Caution disrupt power or process during BIOS update. If interrupted, the device will become...

 Open the catalog to page 17
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.