MT/MTC Series

MT/MTC Series
1 / 31 PagesView full catalog

MT/MTC Series

Product catalog summary
Product Disclaimer
U-Reach disclaims liability for damages from product use. Customers must verify product quality. Specifications may change without notice.
Warranty
A one-year warranty covers parts and labor, excluding consumables. Extended warranties are available.
Piracy Statement
U-Reach is not liable for copyright infringement. Users must ensure legal compliance when copying data.
Before You Start
Read the manual thoroughly. Verify source devices and use approved power sources. Operate in a clean environment and follow safety precautions to prevent damage and data loss.
Functions Table
  • Copy: Transfers data from source to target devices.
  • Compare: Verifies data accuracy between source and targets.
  • Copy+Compare: Combines copy and compare functions.
  • Erase: Offers multiple erasure methods complying with various standards.
  • Utility: Displays device/system information, updates firmware, and verifies HDDs.
  • Setup: Configures system settings like language and copy area.
  • Log Manager: Manages log data, password setup, and clock adjustments.
Hardware Overview
Includes descriptions of ports and indicators with daisy-chain connection for MTC series.
Functions
  • Copy: Connect devices and select the copy function. Recommendations for target device capacity are provided.
  • Compare: Select the compare function to verify data accuracy.
  • Copy+Compare: Automates the copy and compare process.
  • Erase: Details various erasure methods with specific standards and procedures.
  • Utility: Provides options to display device information and update system firmware.
Firmware Update Procedure
  • Prepare a USB drive with the latest firmware. Ensure it is formatted as FAT16 or FAT32.
  • Connect the USB to the duplicator and select 'Update System'. Do not interrupt the process.
System Information
  • Access basic system information by selecting 'System Info'.
HDD Verification
  • 'Verify HDD' checks for bad sectors by reading and writing once, while 'Strict Verify HDD' does so twice.
Setup Menu
  • Access device/system information, updates, and settings through the 'Setup' menu.
  • 'Start-up Menu' allows selection of the default function during initialization.
  • 'Copy Area' offers five modes for data duplication.
Copy Modes
  • 'System and Files' copies data while skipping empty spaces.
  • 'All Partitions' copies or skips specific partitions.
  • 'Whole HDD' copies all data bit-by-bit.
  • 'Percentage' allows copying a specified percentage of the source capacity.
  • 'Deep Analysis' analyzes the entire device before copying.
Advanced Setup
  • Options include skipping bad sectors, setting speed thresholds, and language selection.
  • 'Unknown Format' allows copying or skipping unknown data formats.
  • 'Erase Master' enables/disables source port sanitization.
  • 'HPA Copy Mode' manages Host Protected Area settings.
Log Management
  • Access and export log reports detailing duplication processes.
  • Options include outputting daily, recent, or period-specific reports.
  • Advanced functions allow clearing logs, setting passwords, and adjusting time/date.
Important Notes
  • Ensure USB drives are formatted correctly for log export.
  • Use 'Compare' function for enhanced copy accuracy.
  • Be cautious when clearing logs to avoid system errors.
Log Saving Procedure
Specify a name and location to save the log. The report will be in the designated folder.
Real-time PC-Monitoring
Allows monitoring of real-time status for each working port, including duplication progress and operation logs, viewable on a computer screen.
Launching PC-Monitoring
1. Copy “LV07H” to your PC.
2. Connect the USB cable from the computer to the duplicator.
3. Power on the duplicator.
4. Launch LV07H by double-clicking the software icon.
5. Ensure the duplicator is linked to the computer for real-time monitoring.
6. If not linked, repeat steps 1 to 4.
Using PC-Monitoring
1. Ensure the duplicator status is online and displays “STANDBY”.
2. Execute a “Copy/Compare” task on the duplicator. The program will display device information and record operational progress.
3. After duplication, the program will show the average speed of each device.
File Types for Log Reports
Log reports can be saved as .txt, .csv, .xml, or .pdf.
Cautions
- Up to 30,000 logs can be saved at one time.
- Ensure the duplicator has completed boot-up before launching LV07H.
- Launch the .exe file on the PC, not the U-Reach mini-CD software.
- Run the program as an Administrator if prompted.
- Use only one computer for PC-Monitoring to prevent synchronization issues.
Notes
- Specifications are subject to change without notice.
- Copy speed may vary during operation.
See more

Catalog excerpts

MT/MTC Series-1

MT/MTC Series IDE/SATA Duplicator and Sanitizer User Manual v A.05

 Open the catalog to page 1
MT/MTC Series-3

Product Disclaimer U-Reach is not accountable for any incidental or consequential damages, including, but not limited to property harm, loss of time or data from use of any U-Reach products or any other damages attributable to product malfunction or failure of including without limitation, those attributed to reliance of the materials provided, costs of product replacement, loss of use, data or profits, delays or business interruptions, any principle of legal responsibility arising from or in reference to the use, overall performance, delays in servicing, or lack of ability to render service...

 Open the catalog to page 3
MT/MTC Series-4

Important Notice • Carefully read the entire manual before operating. • Make sure the source device is correct and functioning. • Equal capacity of source and target is recommended for guaranteed data consistency. • Using the Copy +Compare function provides the most flawless duplication. • Damage incurred due to non-compliance with our operating instructions will void the warranty. • Store the equipment safely when not in use and keep out of the reach of children. • Please turn off duplicator before replacing the socket. • Never turn off the power while the firmware updating. • Use only approved,...

 Open the catalog to page 4
MT/MTC Series-7

Sets preferred language. Allows user to copy or skip unknown format(s). Allows user to erase the source port or not. Sets whether to overwrite data in one-byte or Big random data. Skip bad sectors during erase. Sets device power-up buffer time when tasks are initiated. Able to set from 5 to 99 seconds. After keys are locked, only "OK/ESC" buttons will function. (System reboot is required) 6.8.9 Mark after ERASE Creates watermark on the device(s) after erase job is

 Open the catalog to page 7
MT/MTC Series-8

Allows user to select from UDMA2 to UDMA7. The UDMA7 is the fastest. Sets device power down buffer time when tasks are completed. Set the size of the data transfer between the duplicator and the HDD. The setting value is form 512Byte to 16Mbyte. Signature After Copy Do not copy the disk signature onto target devices. 6.8.14 Clean SSD Before Copy Sets to clear SSD before copy function. 6.9 Restore Defaults Reinstates manufacturer settings. 7.1 Out Today Report Outputs today's log data. 7.2 Out Recent Report Outputs recent log data. Outputs a set period of log data. 7.4.2 Setup Password Allows...

 Open the catalog to page 8
MT/MTC Series-9

Hardware Overview Front View USB port for Log Report Outputs and Firmware Updates. Back View Control Buttons Grounding Port USB Port for PC-LINK Daisy-Chain Output Port Power Input Daisy-Chain Input Port

 Open the catalog to page 9
MT/MTC Series-10

Green: Pass Yellow: Powered

 Open the catalog to page 10
MT/MTC Series-11

Daisy-Chain Connection (Available in MTC Series) Front View Daisy-Chain Cable Daisy-Chain Cable Back View If the connection is successful, the connected units will display “Networked Duplicator” on the LCD screen and will disable the control buttons.

 Open the catalog to page 11
MT/MTC Series-12

Step 1: Prepare source and target devices. Step 4: Copy Completed! The quantity of passed or failed target device(s), the copied duration, and CRC64 will be displayed on the LCD after duplication completes. CRC64: During duplication, each port will simultaneously record written data and compare CRC64 between source and targets. The result will be conveyed with a green light (pass) or a red light (fail).

 Open the catalog to page 12
MT/MTC Series-13

Proceed to verify device(s). Scroll to select "2. Compare", then press "OK" to start the verification process. The number of working/connected targets will be displayed on the LCD. Press "OK" to start. Sequentially automates from Function 1, Copy to Function 2, Compare. Scroll to select "3. Copy+Compare", then press "OK" to start the automated duplication and verification process. Step 2: Enter function "4. Erase" Scroll to select "4. Erase", then press "OK" to view these erase modes. • Press "▲" or "▼" to view real-time status of each port. • Press "OK" to view the details of each port. User...

 Open the catalog to page 13
MT/MTC Series-14

4.2 Full Erase This function will erase all data per NIST 800-88 Standards on the connected device(s). Scroll to select "Full Erase”, then press "OK" to start the erasing process. 4.3 DoD Erase This function will erase all data per DoD 5220.22-M Standards on the connected device(s). Scroll to select "DoD Erase", then press "OK" to start the erasing process. 4.4 DoD EraseComp This function will erase all data per DoD 5220.22-M Standards, then compare erasure of the connected device(s). Scroll to select "DoD EraseComp", then press "OK" to start the erasing and verifying process. 4.5 7-Pass Erase...

 Open the catalog to page 14
MT/MTC Series-15

4.8 US Army AR 380-19 This function will erase device(s) complying with Army Regulation 380-19 by the US Army. Scroll to select "US Army AR 380-19", then press "OK" to start the erasing process. 5. Utility This menu contains submenus related to device information, system information and updates. Scroll to "5. Utility”, then press "OK" to view the submenus. 5.1 Show Device Info This function will display basic information such as device model, name, capacity, etc.… Scroll to select "Show Device Info”, then press "OK" to view the connected device(s). Then scroll through to view connected device(s)...

 Open the catalog to page 15
MT/MTC Series-16

5.4 Verify HDD This function scans device for any bad sectors by reading and writing. Scroll to select "Verify HDD”, then press "OK" to initiate process. Then scroll through to view connected device(s) by port order. 5.5 Strict Verify HDD This function scans device for any bad sectors by reading and writing two times. Scroll to select "Strict Verify HDD”, then press "OK" to initiate process. Then scroll through to view connected device(s) by port order. 6. Setup This menu contains submenus related to device information, system information and updates. Scroll to select "6. Utility”, then press...

 Open the catalog to page 16
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.