1. Catalogs
  2. U-Reach Data Solutions Inc.
  3. Auto-detect Dual-interfaces

Auto-detect Dual-interfaces

Auto-detect Dual-interfaces
1 / 23 PagesView full catalog

Auto-detect Dual-interfaces

Product catalog summary
Product Disclaimer
The manufacturer disclaims responsibility for any incidental or consequential damages, including property damage, loss of time or data, due to product malfunction or failure. Customers must ensure the product meets their quality requirements and acknowledge that improper operation can lead to data loss or defective formatting.

Warranty
The product comes with a basic one-year parts and labor warranty, excluding consumables. An optional extended warranty is available. Support is provided for the product's life as defined by the manufacturer.

Piracy Statement
The manufacturer is not liable for copyright infringement. Users must ensure legal copyrights are respected.

Before You Start
Read the manual carefully, verify the source device, and use equal capacity for source and target devices for data consistency. Use approved power sources and operate in a clean, dry environment. Avoid static electricity and ensure proper grounding.

Functions Table
  • Copy: Copies data with four modes available.
  • Compare: Verifies targets against the source.
  • Copy+Compare: Combines copy and compare functions.
  • Erase: Offers Quick Erase, Full Erase, DoD Erase, and Secure Erase.
  • Utility: Displays device info, updates firmware, and calculates CRC64 values.
  • Setup: Configures startup menu, copy area, language, and advanced settings.
  • Log Manager: Manages log reports and settings.

Product Overview
The product includes control buttons, an LCD display, power switch, power input, grounding port, M.2 and SATA module interfaces, and LED status indicators.

Functions
  • Copy: Connect devices, select "Copy" and start. Completion status is displayed on the LCD.
  • Compare: Select "Compare" to verify the source against targets.
  • Copy+Compare: Automates the copy and compare process.
  • Erase: Connect devices, select "Erase" and choose from available methods.
  • Utility: Access device info, update firmware, and calculate CRC64 values.
  • Setup: Configure startup menu, copy area, language, and advanced settings.
  • Log Manager: Outputs log reports and manages settings.

Copy Modes and Procedures
  • System and Files: Copies data while skipping empty spaces, supporting standard formats. Suitable when source data fits within target capacity.
  • All Partitions: Copies or skips partitions based on settings. Requires target capacity to be equal to or larger than the source.
  • Whole HDD: Performs a bit-by-bit copy of the entire source device.
  • Percentage (%): Allows selection of a percentage of the source capacity to copy.

Additional Functions
  • Copy GPT Backup Area: Disabling allows copying from larger to smaller devices, may require a restart.
  • Skip Bad Sectors: Sets a limit on bad sectors to skip.
  • Language Selection: Options include English, Japanese, and Spanish.
  • Advanced Setup: Includes settings for unknown formats, erase functions, and security features.

Log Management
  • Log Report Export: Allows exporting log reports via USB.
  • Advanced Functions: Includes clearing logs, password setup, and adding watermarks to log files.

Important Notes
  • Ensure USB is formatted to FAT16/FAT32 for log export.
  • Keep passwords secure as reset services are not offered.
See more

Catalog excerpts

Auto-detect Dual-interfaces-1

Auto-detect Dual-interfaces M.2/SATA SSD Duplicator User Manual v A.04

 Open the catalog to page 1
Auto-detect Dual-interfaces-3

Product Disclaimer The manufacturer is not accountable for any incidental or consequential damages, which includes, but is not constrained to property harm, loss of time or data from use of our product, or any other damages attributable to product malfunction or failure (including without limitation, those attributable to: (1) reliance of the materials provided, (2) costs of product replacement, (3) loss of use, data or profits, (4) delays or business interruptions, (5) and any principle of legal responsibility, arising out of or in reference to the use or overall performance or from delays in...

 Open the catalog to page 3
Auto-detect Dual-interfaces-4

Important Notice • Carefully read the entire manual before operating. • Make sure the source device is correct and functioning. • Equal capacity of source and target is recommended for guaranteed data consistency. • Using the Copy +Compare function provides the most flawless duplication. • Damage incurred due to non-compliance with our operating instructions will void the warranty. • Store the equipment safely when not in use and keep out of the reach of children. • Please turn off duplicator before replacing the socket. • Never turn off the power while the firmware updating. • Use only approved,...

 Open the catalog to page 4
Auto-detect Dual-interfaces-6

Copies or skips HPA, DCO, unknown partitions, modified formats, etc. defined by settings. Copies all source data, bit-by-bit. Sets percentage of source capacity to copy. Enable this function to copy the end GPT format. Skips source bad sectors. Sets preferred language. Copy Unknown 6.6.1 Copies unknown format(s). Unknown Format Skip Unknown Skips unknown format(s). Disabled Source port will be unable to erase. Enabled Source port will be able to erase. Random character written per byte. Erase Pattern Random character written in a set of area. Sets device power up buffer time prior to copy, erase,...

 Open the catalog to page 6
Auto-detect Dual-interfaces-7

6.6.6 Stop Motor Time Sets device power down buffer time prior to device disconnection. 6.6.7 Boot Password Sets up the login password. No 6.6.8 Delete Disk Yes Signature After Do not copy the disk signature onto Copy target devices. 6.6.9 PCIe Speed Sets data transmission speed. 6.6.10 Target Tolerance Sets the capacity tolerance range between the source and target. The default setting is “No limit”. No 6.6.11 Clean SSD The default setting is “No”. Before Copy Yes 6.7 Restore Defaults Reinstates manufacturer settings. 7.1 Today’s Log Report Outputs today’s log data. 7.2 Recent Log Report Outputs...

 Open the catalog to page 7
Auto-detect Dual-interfaces-8

Front View SATA Module Interface LCD Display Control Buttons Back View Cooling Fan Power Switch Grounding Port Power Input

 Open the catalog to page 8
Auto-detect Dual-interfaces-9

Yellow: Powered Green: Pass Red: Fail The slowest Backward Cancel/Back Time elapsed and Copied processed size copy progress

 Open the catalog to page 9
Auto-detect Dual-interfaces-10

Recommendation: Target device(s)' capacity must be equal to or larger than the source device capacity. Step 2: Connect source and target devices. Step 3: Proceed to copy. Scroll to select "1. Copy", then press "OK" to start the duplication process. The number of working/connected targets will be displayed on LCD. Press "OK" to start. The following information below states what is displayed on the LCD during duplication. Function Total Data Copied Slowest Copied Time & % Port Data Press ▲▼ together for 5 seconds to stop operation on the slowest device. Step 4: Copy Completed! The quantity of passed...

 Open the catalog to page 10
Auto-detect Dual-interfaces-11

3. Copy+Compare Sequentially automates from Function 1, Copy to Function 2, then Compare. Scroll to select "3. Copy+Compare", then press "OK" to start the automated duplication and verification process. 4. Erase Caution Please backup all important data before using this function. Step 1: Connect device(s) for sanitizing. Note Source Port is disabled for erasing. Go to “Erase Master” to enable source port erasing. Step 2: Enter function “4. Erase” Scroll to select “4. Erase”, then press “OK” to view the 5 submenus. 4.1 Quick Erase This function will erase the index table from the connected device(s)....

 Open the catalog to page 11
Auto-detect Dual-interfaces-12

4.5 Secure Erase This function erases the non-loadable areas complying with NIST 800-88 Standards. Scroll to select "4.5 Secure Erase ", then press "OK" to start the erasing process. 5. Utility This menu will reveal submenus related to device information, system information and updates. Scroll to select “5. Utility”, then press “OK” to view the submenus. 5.1 Show Disk Info This function will display basic information such as device model, name, capacity, etc… Scroll to select “5.1 Device Info”, then press “OK” to view the connected device(s). Then through to view connected device(s) by port number...

 Open the catalog to page 12
Auto-detect Dual-interfaces-13

Connect a device to the source port. Scroll to select "5.2.2 Create Update HDD”, then press "OK" to start the format process. This will format the device to a 2GB FAT32 Partition. Step2: Download Firmware. Connect this device to PC. Download the latest firmware provided by supplier’s technical support, unzip the BIOS firmware, then save it to the root directory in the device. Note Ensure that the device does not have any bad sectors. Step3: Proceed to update firmware. Connect this device to the source port. Scroll to select "5.2.1 Update BIOS”, then press "OK" to start the firmware update process....

 Open the catalog to page 13
Auto-detect Dual-interfaces-14

6.2 Copy Area There are 4 submenu modes. Scroll to select “6.2 Copy Area”, then press “OK.” Then scroll through to select one of the four copy methods. ⚫ Selecting the Proper Copy Modes Example: There are two defined partitions in a 500GB device. The charts below illustrate what portion would be duplicated. System and files 100GB This function will analyze and copy only data and skip empty spaces. This function will copy all data This function will copy the within the defined partitions. entire device. ⚫ Copy and Compare Preparations Please consider the following settings before proceeding with...

 Open the catalog to page 14
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.