
SATA 3.0 1 to 3 Ultra-High Speed HDD Duplicator and Sanitizer User Manual v A.04
Open the catalog to page 1Product Disclaimer U-Reach is not accountable for any incidental or consequential damages, which includes, but is not constrained to property harm, loss of time or data from use of a U-Reach product, or any other damages attributable to product malfunction or failure (including without limitation, those attributable to: (1) reliance of the materials provided, (2) costs of product replacement, (3) loss of use, data or profits, (4) delays or business interruptions, (5) and any principle of legal responsibility, arising out of or in reference to the use or overall performance or from delays in servicing...
Open the catalog to page 3Important Notice • Carefully read the entire manual before operating. • Make sure the source device is correct and functioning. • Equal capacity of source and target is recommended for guaranteed data consistency. • Using the Copy+Compare function provides the most flawless duplication. • Damage incurred due to non-compliance with our operating instructions will void the warranty. • Store the equipment safely when not in use and keep out of the reach of children. • Please turn off duplicator before replacing sockets. • Never turn off the power while the firmware updates. • Use only approved,...
Open the catalog to page 4Product Overview Hardware overview Red: Fail Flashing Green: Operating Remain Green: Pass Yellow: Powered Port 3 (Target 2) UP: Backward OK: Confirm/OK DOWN: Forward ESC: Cancel/Back LCD configuration Target HDD Function Time Total Size Copy Progress %
Open the catalog to page 5To show the speed of reading. Copy unknown area when the device cannot identify the format. A random character to be written into every byte. A set of random character to be written into a set of area. 6.5.4 Skip Erase Errors Skips bad sectors during Erase. Skip copy unknown area when the device cannot identify the format. 6.5.2.1 Enable Enable erase source HDD. Disable erase source HDD. (Setup to erase source HDD or not.)
Open the catalog to page 7Back to original manufacturer setting. *Above functions and features subject to change without notice. 7
Open the catalog to page 8Step 1: Prepare source and target devices. N0te Recommendation: Target device(s)' capacity must be equal to or larger than the source device capacity. Step 2: Connect source and target devices.Step 3: Proceed to copy.Scroll to select "1. Copy", then press "OK" to start the duplication process. Note The number of working/connected targets will be displayed on LCD. Press "OK" to start. The information below states what is displayed on the LCD during duplication. Function Total Data Copy 40.0Q3ready Copied Slowest Copied time & % port data Step 4: Copy Completed!The quantity of passed or failed...
Open the catalog to page 9Proceed to verify device(s). Scroll to select "2. Compare", then press "OK" to start the verification process. The number of working/connected targets will be displayed on the LCD. Press "OK" to start. Sequentially automates from Function 1, Copy to Function 2, Compare. Scroll to select "3. Copy+Compare", then press "OK" to start the automated duplication and verification process. Scroll to select "4. Erase", then press "OK" to view the 7 erase modes. Here are a couple tips to see port details during erase: • Press "▲" or "▼" to view real-time status of each port. • Press "OK" to view the details...
Open the catalog to page 10User is responsible for verification of targets’ quality. Testing a few completed Caution targets in a mass production environment for quality control is recommended. 4.1 Quick Erase This function will erase the index table from the connected device(s). Scroll to select "4.1. Quick Erase”, then press "OK" to start the erasing process. 4.2 Full Erase This function will erase all data per NIST 800-88 Standards on the connected device(s). Scroll to select "4.2 Full Erase”, then press "OK" to start the erasing process. 4.3 DoD Erase This function will erase all data per DoD 5220.22-M Standards on...
Open the catalog to page 114.7 Enhanced Secure Erase This function erases devices that supports this feature. Scroll to select "4.7 Enhanced Secure Erase", then press "OK" to start the erasing process. This menu contains submenus related to device information, system information and updates. Scroll to "5. Utility”, then press "OK" to view the submenus. 5.1 Show Device Info This function will display basic information such as device model, name, capacity, etc.… Scroll to select "5.1 Disk Info”, then press "OK" to view the connected device(s). Then scroll through to view connected device(s) by port number order. 5.2 Update...
Open the catalog to page 12Update will take about a minute to complete. Please do not disrupt during BIOS update, otherwise it would cause irretrievable error on duplicator. The manufacturer will not held responsible for any damages. This function will display basic information such as controller, model number, software version, etc. Scroll to select "5.3 System Info", then press "OK" to view all information. This function is to measure the reading speed of the HDD by reading the whole HDD. This function is to measure the writing speed of the HDD by writing the whole HDD. Content will be erased. Confirm? W 1:08 465G89.6M/S...
Open the catalog to page 13Example: There are two defined partitions in a 500GB device. The charts below illustrate what portion would be duplicated. System and files 100GB Whole Device This function will analyze and copy only data and skip empty spaces. This function will copy all data within the defined partitions. This function will copy the entire device. ⚫ Copy and Compare Preparations Please consider the following settings before proceeding with copy or compare: - 6.1 Copy Area - 6.3 Skip Bad Sectors - 6.5.1 Unknown Format - 6.5.6 HPA Copy Mode Using appropriate copy modes can greatly reduce operation time and increase...
Open the catalog to page 1421 Pages
19 Pages
18 Pages
31 Pages
31 Pages
23 Pages
23 Pages
37 Pages
21 Pages
24 Pages
4 Pages
41 Pages
2 Pages
41 Pages