Product Information Solenoid valve NC, DN 7 two chambers in line Characteristics servo-controlled normally closed (NC) long term performance capability suitable for hot water up to 90 °C easy to assemble and service solenoid replaceable while medium circuit remains untouched, solenoid rotatable 4 x 90° any fitting position high operating safety through the use of high quality materials and 100% final testing of the products Description 2/2-way solenoid valve of nominal diameter DN 7 for use with cold and heated potable water and physically and chemically similar media. The valve is servo-controlled and normally closed (NC). dental appliances irrigation systems industrial appliances air conditioning pollution equipment dish washers washing machines water treatments Valves of this design are 2-chamber valves with the inlet ninety degrees to the outlet. The two chambers operate simultaneously to increase functional reliability. The function is similar to the assembly of two single valves in line. These valves can be manufactured with various connections. typical performance curve Coil systems for common voltage and frequency ranges are available. Electrical operating safety is achieved by insulation class F and can be supported by integrated protective circuits. By using high quality insulation materials, continuous duty (100 % ED) at higher medium temperatures is possible. The glass fibre reinforced polyamide valve body persists hot water. Protection against corrosion of inner parts exposed to the medium is achieved by using stainless steel. p / bar © copyright A.u.K. Müller, technical changes reserved

Product Information Solenoid valve NC, DN 7 two chambers in line Technical Data Type 2/2-way valve inlet ninety degree to outlet with two chambers in line, servo-controlled Fitting position cold and heated potable water and physically and chemically similar media Flow regulator Pressure surge Coil type solenoid valve 1) Fixing groove 1 , 2 valve chamber other voltages on request Voltage tolerance +10% -15% Duty cycle Valve body PA 66 glass fibre reinforced Plunger guide stainless steel stainless steel EPDM NBR (on request) VMQ (on request) Coil coating PBT,PET or epoxy resin Protection Type Nominal...