Catalog excerpts
Product Information Solenoid valve NC, DN 10 three chambers Characteristics servo-controlled normally closed (NC) long term performance capability suitable for hot water up to 90 °C easy to assemble and service solenoid replaceable while medium circuit remains untouched, solenoid rotatable 4 x 90° any fitting position high operating safety through the use of high quality materials and 100% final testing of the products Description 2/2-way solenoid valve of nominal diameter DN 10 for use with cold and heated potable water and physically and chemically similar media. The valve is servo-controlled and normally closed (NC). Valves of this design are three chamber straight valves and can be manufactured with various connections. The flow path of the inlet is devided downstream the first chamber into two subsequent chambers, which have to be operated separately. The function is similar to two single valves assembled in line with a redirection of a flow path. irrigation systems industrial appliances air conditioning pollution equipment dish washers washing machines water treatments typical performance curve One of the outgoing chamber can be designed as a direct acting valve on request and will close completely in case of low pressure Coil systems for common voltage and frequency ranges are available. Electrical operating safety is achieved by insulation class F and can be supported by an integrated protective circuit. By using high quality insulation materials, continuous duty (100 % ED) at higher medium temperatures is possible. The glass fibre reinforced polyamide valve body persists hot water. Protection against corrosion of inner parts exposed to the medium is achieved by using stainless steel. © copyright A.u.K. Müller, technical changes reserved
Open the catalog to page 1
Product Information Solenoid valve NC, DN 10 three chambers Technical Data Type Fitting position cold and heated potable water and physically and chemically similar media Flow regulator Pressure surge Coil type 2/2-way three chambers, servo-controlled solenoid valve other voltages on request Voltage tolerance +10% -15% 1) Fixing groove 1 , 2 , 3 valve chamber Duty cycle Protection type Nominal power Valve body PA 66, glass fibre reininforced Plunger guide stainless steel Coil connections flat tabs 6,3 x 0,8 mm plug socket according to EN 175301-803 (IP65), several cable connections (IP67,...
Open the catalog to page 2All A. u. K. Müller catalogs and technical brochures
-
Series 42.010.0004 Pages
-
Series 21.010.1264 Pages
-
Series 21.010.1154 Pages
-
Series 19.00x.2874 Pages
-
Series 01.007.1112 Pages
-
Series 46.008.1012 Pages
-
Series 18.00x.0006 Pages
-
Series 41.008.20x4 Pages
-
Series 21.010.1104 Pages
-
Série 21.010.2264 Pages
-
Series 04.040.1134 Pages
-
Series 18.00x.0016 Pages
-
Series 47.00x.1022 Pages
-
Series 50.005.1002 Pages
-
Series 50.005.1014 Pages
-
Series 04.050.9164 Pages
-
Series 12.017.8006 Pages
-
Series 12.017.400 /~.5004 Pages
-
Series 11.0004 Pages
-
13.007.226 Aquastop3 Pages
-
Series 01.013.2252 Pages
-
42.008.126 Pressure Reducer4 Pages
-
Miniature valve, bistable4 Pages
-
Miniature valve, monostable4 Pages
-
42.010.000 Pressure Reducer2 Pages
-
Agricultural Engineering12 Pages
-
Environmental Technology8 Pages
-
Industry16 Pages
-
Sanitary12 Pages
-
Medical Technology12 Pages
-
Vending16 Pages
-
Corporate brochure4 Pages
