A. u. K. Muller Solenoid valves Control valves Special valves and systems A.u.K. Muller GmbH & Co. KG Dresdener Str. 162 D-40595 Dusseldorf/Germany Tel.: +49(0)211-7391-0 e-mail: [email protected] Internet: www.akmueller.de I Direct acting I Medium separated I Long term performance capability I Works from zero pressure I Easy to assemble and service I Low power consumption I Any fitting position I Minimised dead areas I High operating safety through the use of high quality and 100% final testing of the products Direct acting 2/2 way solenoid valve with different orifice sizes for control of neutral gases and liquids. The plunger of the magnetic system is protected by spatial separation from the medium. Valves of this design are single chamber valves with John Guest® push-fit connections. The coil system can be customised for common voltage and frequency ranges on request. Electrical operating safety is achieved by insulation class F and can be supported by an integrated protective circuit. I Hot / cold drink dispensers I Tank or boiler draining I Medical engineering I Industrial appliances I Laboratory / analysis equipment Approved versions available on request: I WRAS I Others on request Due to the use of high quality materials, the valve is applicable for high ambient and medium temperatures. Highly suitable for using in laboratory and analysis equipment. Ap / bar © copyright A.u.K. Muller, subject to changes without prior notice E1017

A. u. K. Muller Series 47.00x.l02 Technical Data Valve body John Guest cartridge Membrane Cv-value P Cv-value R p-operating ID Tubes are to be installed in a way that enduring mechanical tension on in- and outlet connections remain as low as possible! © copyright A.u.K. Muller, subject to changes without prior notice MS.025 (IP67, IP68)