A.u.K. Muller □ hot / cold drink dispensers tank or boiler draining automatic animal feeding equipment series 46.008.101Description 2/2-way solenoid valve of nominal diameter DN 8 for liquid dispense. This valve is direct controlled and normally closed (NC). Valves of this design are medium separated seat valves, where the plunger is separated by a diaphragm from the medium. The valve body and outlet nozzle are a single piece moulding. This valve can be manufactured with a variety of customised connections in DC or AC voltage. Low power or PPM triggering can be used. Solenoid valves Control valves Special valves and systems A.u.K. Muller GmbH& Co. KG DresdenerStr. 162 D-40595 Dusseldorf/Germany Tel.: +49(0)211-7391-0 e-mail: [email protected] ® direct controlled ® plunger separated by diaphragm from medium ® long term performance capability ® flow rate adjustable (flow regulation screw) ® suitable for food and hot water appliances ® works from zero pressure ® similar hydraulic performance for AC or DC types ® other hydraulic connections on request ® complete drainage of valve outlet after shut off ® easy to assemble and service ® coil change without opening of medium circuit, coil can be mounted 4 x 90° ® high operating safety through the use of high quality and 100% final testing of the products ® certificates: UL, NSF, WRAS Electrical operating safety is achieved by PBT coating of the coil and can be supported by an additional protection circuit. The valve is available in different PSU valve body types and is distinguished primarily by its food grade and hot water capability. © copyright A.u.K. Muller, technical changes reserved

A.u.K. Muller series 46.008.101 Technical Data Valve body other voltages on request 1) Ventilation of outlet nozzle to drain downstream tubing completely. Different lengths of breather tube on 2) Regulation screw for vernier adjustment of flow. 3) Different inlet nozzels and boiler sealings on request