Catalogs >
A. u. K. Müller >
Series 21.010.110

Series 21.010.110
4Pages

Catalog excerpts

Servo-controlled valve nominal diameter DN 10, which closes by means of buoyancy of a floater to control level in tanks. Solenoid valves Control valves Special valves and systems A.u.K. Muller GmbH & Co. KG Dresdener Str. 162 D-40595 Dusseldorf/Germany Tel.: +49(0)211-7391-0 e-mail: info@akmueller.de Internet: www.akmueller.de □ Servo-controlled □ Redirection of flow by 90° □ Operation largely independent from inlet pressure □ Easy to assemble and service Compact design □ For heated water up to 60 °C □ Adjustable level height □ High operating safety through the use of high quality materials and 100% final testing of the products Approved versions available on request: I KTW/W270 I WRAS I Others on request If liquid is drained from the tank, the float valve refills automatically and closes when the maximum level has been reached. The outlet jet is directed on to a guide, which pushes the lever to closed. This effects a relative constant flow, covering a wide pressure range. An overflow of small tanks will be prevented during the initial filling. By reaching a sufficient level within the tank during refill, the final closing procedure is due to the buoyancy of the float body. Valves of this design are single chamber valves with the inlet ninety degrees to the outlet. The valve, having a glass fibre reinforced polyamid housing, can be manufactured with various connections and is suitable up to 60° by using a PE-floater. © copyright A.u.K. Muller, technical changes reserved

Open the catalog to page 1

Technical Data 1) Fixing groove 2) Guide lever 3) Float lever aterials Valve body Versions see next page ptions Material Inlet Outlet

Open the catalog to page 2

Product Information Float Valve, DN 10 Guide lever Flow regulator in inlet The individual flow rate has to synchronised with the water surface area within tank at float level height No flow restriction. A restriction of the pressure range (e.g. 0,5 - 8 bar) may be recommended, if the rise of the water level within the tank may lead to an overflow by a gush of water. Flow restriction above 1,5 bar to approx. 35 l/min. Flow restriction above 1 bar. Depends on the used flow regulator with reduced tolerance compared to b) MR04 or MR06 in inlet of valve is recommended. The choice of flow...

Open the catalog to page 3