Product Information Miniature valve, latching A. u. K. Müller Solenoid valves Control valves Special valves and systems A. u. K. Müller GmbH & Co. KG Dresdener Str. 162 D-40595 Düsseldorf/Germany e-mail: [email protected] Internet: www.akmueller.de Description The latching, direct controlled 2/2 way valve 19.00x.287, available with nominal orifice of 0,5 mm or 0,8 mm, is used as dosing valve or block valve in parallel fluid handling as well as pilot valve for servo controlled main valves in a pressure range up to 10 bar. Dosing valve for small quantities Sampling valve Block valve in fluid manifolds Pilot valve unit for servo controlled main valves Direct acting valve with miniaturized design Plug-in valve with a station width of 15 mm Latching version Low power consumption, suitable for battery operation Fast switching times Suitable for hot water up to 70 °C Ambient temperature up to 60 °C Suitable for the thermal as well as chemical disinfection Hygiene benefit by 100% final testing with air Long term performance capability by the use of high quality materials Testing of each device ensures highest quality standard Approvals KTW-BWGL System 1+ ACS WRAS By combination of the pilot valve with servo components, the control of larger volume flows can be easily implemented and allows the flexible realization of different flow paths. Furthermore, a high level of serviceability is achieved by an easy replaceable component. The valve is characterized by its compact design and low power consumption. The power consumption is minimised by use of rectangular pulse control to increase long-term performance, durability and battery life. Typical Performance Curve (determined in plug-in contour) p / psi Also available as mono stable type, see separate data sheet. © copyright A.u.K. Müller, subject to changes without prior no

Miniature valve, latching A. u. K. Muller Series I9.00x.287 Technical Data vave body Plunger and spring stainless steel Seal EPDM (VMQ on request) O-Rings EPDM Coil coating hotmelt other voltages on request Male connector Polarity of connector: strand color RED Pin 1 PLUS(+) pulse to open strand color BLACK MINUS(-) Special cables or strands without connector (IP00) on request. © copyright A.u.K. Muller, subject to changes without prior notice

Miniature valve, latching A. u. K. Muller Series I9.00x.287 Plug in contours Bayonet fixing Roughness (DIN EN ISO 1302) (surface must be smooth and burr free) Screwed fixing 023±O,1 fixing bore hole M 3 inlet alternative outlet outlet inlet 0 of in- and outlet bore holes >lmm J t lateral in- and outlet only shown exemplary, actual position may differ © copyright A.u.K. Muller, subject to changes without prior notice 3

Product Information Miniature valve, latching  Application examples Integration of cartridge vale in adapter housing as single valve or manifold application. Adapter body single valve Valve manifold Installation example Adapter body or manifold on request. © copyright A.u.K. Müller, subject to changes without prior noti