Series 18.00x.000
6Pages

{{requestButtons}}

Catalog excerpts

Series 18.00x.000 - 1

2/2-Way Direct Acting Solenoid Valves NC Solenoid valves Control valves Special valves and systems A.u.K. Muller GmbH & Co. KG Dresdener Str. 162 D-40595 Dusseldorf/Germany Tel.: +49(0)211-7391-0 e-mail: info@akmueller.de Internet: www.akmueller.de ■ Direct acting ■ Compact design ■ Long term performance capability ■ Suitable for food and hot water appliances ■ Works from zero pressure ■ Easy to assemble and service ■ Coil change without opening of medium circuit, coil can be mounted 4 x 90° ■ High operating safety by the use of high quality materials and 100% final testing of the products Direct acting 2/2-way solenoid valve of several nominal diameters for use with neutral gases and liquids. This valve is direct acting and normally closed (NC). Valves of this design are single chamber straight through valves, with threaded tube clamp or push-fit connections at outlet and inlet. ■ Saturated steam applications up to 143° C ■ Steam cleaners and ironing machines ■ Hot / cold drink dispensers (espresso makers) ■ Medical equipment ■ Industrial applications Possible Approvals ■ Regulation (EC) No. 1935/2004 ■ NSF 169 ■ UL (Only: 24 VDC) ■ Other approved versions available on request The valve body is made of PPSU, which is suitable for hot water applications and saturated steam. Typical Performance Curve This valve is designed for continuous operation (duty cycle 100%). Electrical operating safety is achieved by using high quality materials of insulation class H. © copyright A.u.K. Muller, subject to changes without prior notice

Open the catalog to page 1
Series 18.00x.000 - 2

2/2-Way Direct Acting Solenoid Valves NC A. u. K. Muller Series 18.00x.000 Technical Data 1) Fixing possibility for self tapping screw 0 3,8 x 9 mm Materials Valve body PPSU Plunger guide Stainless steel Plunger Stainless steel Seal EPDM Protection class I according to Options Tube material Tube dimension outer 0 x wall thickness Flexible plastic tubes 6 x 1 mm Metal tubes 6 x 1 mm special groove to be cut by user - Other tube dimensions are in preparation _La PPSU valve bodies may not come in contact with: acetone, ethers, ketones, aromatic hydrocarbons, chlorinated hydrocarbons, acids and...

Open the catalog to page 2
Series 18.00x.000 - 3

2/2-Way Direct Acting Solenoid Valves NC A. u. K. Muller Series 18.00x.000 Please refer to our Fitsys 18 datasheet for additional valve connection options. Alternative Connections Inlet and outlet connections can be combined © copyright A.u.K. Muller, subject to changes without prior notice 3

Open the catalog to page 3
Series 18.00x.000 - 4

Product Information 2/2-Way Direct Acting Solenoid Valves NC  Manifold System with Ø 6 mm Push-fit Connection Just four different Ø 6mm push fit manifold pieces enable unlimited bank valve combinations. Please provide a sufficient ventilation of the coils. Configuration examples In addition to hot water the system is also suitable for saturated steam applications up to a temperature of 143° C. A fixed relation between pressure and temperature exists for saturated steam, as is shown in the adjacent diagram. Pressure-temperature Diagram for saturated Steam p / psi 0 © copyright A.u.K....

Open the catalog to page 4
Series 18.00x.000 - 5

Product Information 2/2-Way Direct Acting Solenoid Valves NC  Manifold system with Ø 6 mm Push-fit Connection ) Flow direction ( can also be reversed. * Area of o-ring seal zulässige Maßstäbe 5:1 / 2:1 / 1:1 / 1:2 zulässige Masshöhe (Schriftgröße) 5,7 Betriebsdaten Medium Wasser: Betriebsdaten Medium Sattdampf: Werkstoffe: Datum Name zulässige Maßstäbe 5:1 / 2:1 / 1:1 / 1:2 zulässige Masshöhe (Schriftgröße) 5,7 C( 6) 23 ISO Ansicht vertikal 20° / horizontal 20° Name: DBL-WZ_001_074_002-DOPPELANSCHL .DRW / Zeichnung: / Modell: Betriebsdaten Medium Wasser: Betriebsdaten Medium Sattdampf:...

Open the catalog to page 5
Series 18.00x.000 - 6

Product Information 2/2-Way Direct Acting Solenoid Valves NC  Example of mounting for valves and manifold components on a mounting plate Self-Cutting screw Drilling pattern For valve mounting with self-cutting screw For mounting the manifold component with M4 screw Valve mounting with self-cutting screw Mounting of manifold component with M4 screw © copyright A.u.K. Müller, subject to changes without prior noti

Open the catalog to page 6

All A. u. K. Müller catalogs and technical brochures

  1. Industry

    16 Pages

  2. Sanitary

    12 Pages

  3. Vending

    16 Pages