Series 12.017.400 /~.500

Product catalog summary

Product Information: Strainer, DN 17

Description: The strainer is designed for the treatment of drinking water using mechanical filters, as regulated by DIN EN 13443. It protects taps and equipment from damage caused by suspended particles. The filter insert can be replaced without disassembly or tools, and it is recommended to mount the strainer with the filter insert pointing downwards to prevent dirt accumulation.

Applications: Suitable for protecting solenoid valves, sanitary fittings, flow meters, check valves, and instantaneous water heaters.

Characteristics: The strainer features replaceable filter elements that are easy to clean, high flow rate, and can handle medium temperatures up to 90°C and operating pressures up to 10 bar. Various connection options are available.

Types:

Type 12.017.400: Requires existing shut-off devices for filter replacement.
Type 12.017.500: Includes integrated shut-off capability, eliminating the need for upstream shut-off devices.

Materials: The body and inner parts are made of PA 6/6 and stainless steel, with EPDM seals and stainless steel filters.

Technical Data:

Mesh sizes: 0.11 mm / Ø 0.06 mm and 0.25 mm / Ø 0.10 mm.
Maximum medium temperature: 90°C.
Maximum operating pressure: 10 bar.
Admissible pressure loss: 6 bar max.
Cv-values: 79 l/min for 12.017.400 and 70 l/min for 12.017.500.

Options: The strainer is available with or without shut-off capability, and various inlet and outlet configurations are provided.

Catalog excerpts

Product Information Strainer, DN 17 A.u.K. Müller Solenoid valves Control valves Special valves and systems A. u. K. Müller GmbH & Co. KG Dresdener Str. 162 D-40595 Düsseldorf/Germany e-mail: [email protected] Internet: www.akmueller.de Characteristics replaceable filter elements, easy to clean easy to assemble high flow rate medium temperature up to 90 °C operating pressure up to 10 bar various connections available Description The treatment of drinking water by the use of mechanical acting filters and their design is regulated in DIN EN 13443. for protection of ... solenoid valves sanitary fittings flow meters check valves instantaneous water heaters The upstream mounted strainer will protect taps and other equipment against damages or malfunctions caused by suspended particles. There is no need to disassemble the strainer nor tool to replace the filter insert. It is recommended to mount the strainer with the filter insert preferably downwards, to avoid that collected dirt remains in the housing, during replacement of the insert. Type 12.017.400 is intended to be used for applications, in which valves, ball valves or others are already installed for use as shut off devices during replacement of insert. typical performance curve Type 12.017.500 integrates a shut off flow capability. The strainer is forcibly closed and an upstream shut off device is not required. © copyright A.u.K. Müller, technical changes reserved

Open the catalog to page 1

Product Information Strainer, DN 17 Technical Data Type mechanical filter Fitting position preferably filter element pointing downwards cold and heated potable water and physically and chemically similar media Admissible pressure loss l/min l/min Materials Body / inner parts PA 6/6 others on request/ stainless steel Mesh size / wire diameter filter inserts Options Inlet Length Mesh size / wire diameter Part number 0,25 mm / 0,10 mm ID: 005945 Cold and Hot wa

Open the catalog to page 2