Catalog excerpts
Product Information Servo-controlled solenoid valve NC, DN 13 Characteristics servo-controlled normally closed (NC) solenoid replaceable while medium circuit remains untouched, solenoid rotatable 4x90° suitable for hot water up to 90 °C similar performance for alternating or direct current long term performance capability optimized water hammer characteristic by low noise emission according to EN 60730 high operating safety by the use of high quality materials and 100% final testing of the products Applications steam appliances dental appliances hot / cold drink dispensers industrial appliances air conditioning agricultural implements pollution equipment temperature equalisers dish washers ice machines washing machines water treatment Description 2/2-way solenoid valve of nominal diameter DN 13 for use with cold and heated potable water and physically and chemically similar media. The valve is servo-controlled and normally closed (NC). Valves of this design are double chamber straight valves and can be manufactured with various connections. Coil systems for common voltage and frequency ranges are available. Electrical operating safety is achieved by insulation class F and can be supported by an integrated protective circuit. By using high quality insulation materials, continuous duty (100 % ED) at higher medium temperatures is possible. The glass fibre reinforced polyamide valve body persists hot water. Protection against corrosion of inner parts exposed to the medium is achieved by using stainless steel. typical performance curve 120 p / bar © copyright A.u.K. Müller, technical changes reserved
Open the catalog to page 1
Product Information Servo-controlled solenoid valve NC, DN 13 Technical Data Type any, preferably with coil upwardly cold and heated potable water and physically and chemically similar media Flow regulator Pressure surge Coil type Fitting position 2/2-way 2 chamber straight valve, servo-controlled solenoid valve 1) Fixing groove 1 , 2 valve chamber other voltages on request Valve body PA 66 glass fibre reinforced PPE on request PEI on request Voltage tolerance +10% -15% Duty cycle stainless steel Nominal power stainless steel Protection Type EPDM NBR (on request) VMQ (on request) Coil...
Open the catalog to page 2All A. u. K. Müller catalogs and technical brochures
-
Series 42.010.0004 Pages
-
Series 21.010.1264 Pages
-
Series 21.010.1154 Pages
-
Series 19.00x.2874 Pages
-
Series 01.007.1112 Pages
-
Series 46.008.1012 Pages
-
Series 18.00x.0006 Pages
-
Series 41.008.20x4 Pages
-
Series 21.010.1104 Pages
-
Série 21.010.2264 Pages
-
Series 04.040.1134 Pages
-
Series 18.00x.0016 Pages
-
Series 47.00x.1022 Pages
-
Series 50.005.1002 Pages
-
Series 50.005.1014 Pages
-
Series 04.050.9164 Pages
-
Series 12.017.8006 Pages
-
Series 12.017.400 /~.5004 Pages
-
Series 11.0004 Pages
-
13.007.226 Aquastop3 Pages
-
42.008.126 Pressure Reducer4 Pages
-
Miniature valve, bistable4 Pages
-
Miniature valve, monostable4 Pages
-
42.010.000 Pressure Reducer2 Pages
-
Agricultural Engineering12 Pages
-
Environmental Technology8 Pages
-
Industry16 Pages
-
Sanitary12 Pages
-
Medical Technology12 Pages
-
Vending16 Pages
-
Corporate brochure4 Pages
