Product Information Miniature valve, latching A. u. K. Müller Solenoid valves Control valves Special valves and systems A. u. K. Müller GmbH & Co. KG Dresdener Str. 162 D-40595 Düsseldorf/Germany e-mail: [email protected] Internet: www.akmueller.de Characteristics Direct acting valve with miniaturized design Plug-in valve with a station width of 15 mm Latching version Low power consumption, suitable for battery operation Fast switching times Suitable for hot water up to 70 °C Ambient temperature up to 60 °C Suitable for the thermal as well as chemical disinfection Hygiene benefit by 100% final testing with air Description The latching, direct controlled 2/2 way valve 19.00x.287, available with nominal orifice of 0,5 mm or 0,8 mm, is used as dosing valve or block valve in parallel fluid handling as well as pilot valve for servo controlled main valves in a pressure range up to 10 bar. By combination of the pilot valve with servo components, the control of larger volume flows can be easily implemented and allows the flexible realization of different flow paths. Furthermore, a high level of serviceability is achieved by an easy replaceable component. Dosing valve for small quantities Sampling valve Block valve in fluid manifolds Pilot valve unit for servo controlled main valves Long term performance capability by the use of high quality materials Testing of each device ensures highest quality standard typical performance curve (determined in plug-in contour) The valve is characterized by its compact design and low power consumption. The power consumption is minimised by use of rectangular pulse control to increase long-term performance, durability and battery life. Also available as mono stable type, see separate data sheet. © copyright A.u.K. Müller, subject to changes without prior notice

Product Information Miniature valve, latching Series 19.00x.287 Technical Data Type latching, pulse controlled Fitting position cold and heated potable water and physically and chemically similar media 2/2-way, plug-in, direct controlled miniature valve higher on request according to EN 60730 Materials Plunger guide and vave body Nominal voltage Operating voltage at T-Ambiant 25 °C 2,4 - 3,3 VDC open/close 4,0 - 6,9 VDC open/close on request Coil coating Nominal power at Nominal voltage stainless steel Male connector Polarity of connector: strand color RED Pin 1 PLUS(+) pulse to open strand color...

Product Information Miniature valve, latching Bayonet fixing Freeing of Ø >10 / < 18 mm approx. 0,5 mm deep inlet alternative outlet Ø of in- and outlet bore holes >1mm Screwed fixing Freeing of Ø >10 / < 16 mm approx. 0,5 mm deep fixing bore hole M 3 inlet alternative outlet Ø of in- and outlet bore holes >1mm © copyright A.u.K. Müller, subject to changes without prior notice

Product Information Miniature valve, latching Application examples Valve manifold Adapter body Installation example Adapter body or manifold on request. © copyright A.u.K. Müller, subject to changes without prior notice