Product Information Servo-controlled solenoid valve NO, DN 10 A.u.K. Müller Solenoid valves Control valves Special valves and systems A. u. K. Müller GmbH & Co. KG Dresdener Str. 162 D-40595 Düsseldorf/Germany e-mail: [email protected] Internet: www.akmueller.de Characteristics servo-controlled normally open (NO) solenoid replaceable while medium circuit remains untouched, solenoid rotatable 4x90° medium temperature up to 90 °C similar hydraulic performance for AC and DC types optimized water hammer characteristic by low noise emission according to EN 60730 long term performance capability high operating safety by the use of high quality materials and 100% final testing of the products Description 2/2-way solenoid valve of nominal diameter DN 10 for use with cold and heated potable water and physically and chemically similar media. The valve is servo-controlled and normally open (NO). Valves of this design are single chamber straight valves and can be manufactured with various connections. Coil systems for common voltage and frequency ranges are available. Electrical operating safety is achieved by insulation class F and can be supported by an integrated protective circuit. steam appliances dental appliances hot / cold drink dispensers industrial appliances air conditioning agricultural implements pollution equipment temperature equalisers dish washers ice machines washing machines water treatment typical performance curve By using high quality insulation materials, continuous duty (100 % ED) at higher medium temperatures is possible. The glass fibre reinforced polyamide valve body persists hot water. Protection against corrosion of inner parts exposed to the medium is achieved by using stainless steel. © copyright A.u.K. Müller, technical changes reserved

Product Information Servo-controlled solenoid valve NO, DN 10 Technical Data Type solenoid valve 2/2-way single chamber straight valve, servo-controlled Fitting position any, preferably with coil upwardly cold and heated potable water and physically and chemically similar media Flow regulator Pressure surge Coil type other voltages on request 1) Fixing possibility for self tapping screw Ø 4,2 2) Fixing groove Voltage tolerance +10% -15% Duty cycle PA 66 glass fibre reinforced PPE on request PEI on request (T-medium max. 30 °C) Plunger guide stainless steel stainless steel EPDM NBR (on request)...

Product Information Servo-controlled solenoid valve NO, DN 10 1) Fixing possibility for self tapping screw Ø 4,2 2) Fixing groove Options Material clip possible) © copyright A.u.K. Müller, technical changes reserved