Catalogs >
A. u. K. Müller >
2/2 way direct acting solenoid valve NC

2/2 way direct acting solenoid valve NC
3Pages

Catalog excerpts

2/2 way direct acting solenoid valve NC - 1

direct acting compact design long term performance capability suitable for food and hot water appliances works from zero pressure similar hydraulic performance for AC or DC types DC version with low noise and low wear out due to internal plunger attenuation easy to assemble and service coil change without opening of medium circuit, coil can be mounted 4 x 90° high operating safety through the use of high quality and 100% final testing of the product hot / cold drink dispensers medical equipment automatic welding equipment 2/2-way solenoid valve of different nominal diameters for use with neutral gases and liquids. This valve is direct controlled and normally closed (NC). Valves of this design are single chamber straight through valves, with nozzles at outlet and inlet. The valve body is made of PEI, which is suitable for hot water applications. typical performance curve (fluids) This valve is designed for intermittent operation (duty cycle 50%). DN 3 Electrical operating safety is achieved by using high quality materials of insulation class F and can be supported by an additional protection circuit. © copyright A.u.K. Müller, technical changes reserved

Open the catalog to page 1

2/2 way direct acting solenoid valve NC - 2

solenoid valve 2/2-way single chamber straight valve, direct acting Fitting position neutral gases, cold and heated potable water and physically and chemically similar media T-Medium for connections nozzle John Guest T-Ambient for connections nozzle John Guest against flow direction Coil type Valve body stainless steel stainless steel PEI other materials on request Plunger guide Nominal voltages other voltages on request Protection class Insulation class Coil connections Nominal power Duty cycle Protection Type Coil coating Voltage tolerance according to EN 60730 (for incorporation in class...

Open the catalog to page 2

2/2 way direct acting solenoid valve NC - 3

John Guest cartridge EPDM NBR (on request) slot for nut X = M4 DIN EN ISO 4032 Y = N 6-32 UNC ANSI B1.1 The applicability of the John Guest connection to medium- or ambient temperatures higher then 65°C is temporarily feasible, but has to be verified accordingly in the respective application. John Guest cartridge John Guest cartridge John Guest cartridge John Guest cartridge © copyright A.u.K. Müller, technical changes reserved

Open the catalog to page 3

2/2 way direct acting solenoid valve NC 3Pages

Catalog excerpts

All A. u. K. Müller catalogs and technical brochures

2/2 way direct acting solenoid valve NC
3Pages