Catalogs >
A. u. K. Müller >
01.017.524 Servo-controlled solenoid valve NC, DN 17

01.017.524 Servo-controlled solenoid valve NC, DN 17
2Pages

Catalog excerpts

01.017.524 Servo-controlled solenoid valve NC, DN 17 - 1

servo-controlled normally closed (NC) solenoid replaceable while medium circuitry remains untouched suitable for hot water up to 90 °C similar performance for alternating- or direct current long term performance capability optimized water hammer characteristic by low noise emission according to EN 60730 high operating safety by the use of high quality materials and 100% ﬁnal testing of the products steam appliances dental appliances hot / cold drink dispensers industrial appliances air conditioning agricultural implements pollution equipment temperature equalisers dish washers ice machines washing machines water treatment 2/2-way solenoid valve of nominal diameter DN 17 for use with cold and heated potable water and physically and chemically similar media. The valve is servo-controlled and normally closed (NC). Valves of this design are single chamber straight valves with thread at in- and nozzle at outlet. and typical performance curve Electrical operating safety is achieved by insulation class F and can be supported by an integrated protective circuit. By using high quality insulation materials, continuous duty (100 % ED) at higher medium temperatures is possible. Protection against corrosion of inner parts exposed to the medium is achieved by using stainless steel. Coil systems for common voltage frequency ranges are available. p / bar © copyright A.u.K. Müller, technical changes reserved

Open the catalog to page 1

01.017.524 Servo-controlled solenoid valve NC, DN 17 - 2

solenoid valve 2/2-way single chamber straight valve, servo-controlled Fitting position any, preferably with coil upwardly cold and heated potable water and physically and chemically similar media Flow regulator Pressure surge Coil type other voltages on request Voltage tolerance +10% -15% Duty cycle Plunger guide stainless steel stainless steel Coil coating PBT,PET or epoxy resin stainless steel (in inlet) Protection Type Valve body Nominal power Coil connections ﬂat tabs 6,3 x 0,8 mm plug socket according to EN 175301-803 (IP65), several cable connections (IP67, IP68) Insulation class...

Open the catalog to page 2