Specifications:
The document describes a 2/2-way solenoid valve with a nominal diameter of DN 17, designed for use with cold and heated potable water and similar media. It is servo-controlled and normally closed (NC). The valve features a single chamber straight design with threaded inlets and outlets of different dimensions. It supports common voltage and frequency ranges, with electrical safety ensured by insulation class F and an integrated protective circuit. The valve is suitable for continuous duty at higher medium temperatures due to high-quality insulation materials and stainless steel components for corrosion protection.

Applications:
The valve is applicable in various appliances such as steam and dental appliances, hot/cold drink dispensers, industrial appliances, air conditioning, agricultural implements, pollution equipment, temperature equalizers, dishwashers, ice machines, washing machines, and water treatment systems.

Performance and Features:
The valve is designed for hot water up to 90°C and offers similar performance for both alternating and direct current. It is characterized by long-term performance capability and optimized water hammer characteristics with low noise emission according to EN 60730. High operating safety is ensured through the use of high-quality materials and 100% final testing.

Technical Data:
- Material: Brass valve body, stainless steel plunger guide, plunger, and spring, EPDM membrane and sealings (NBR on request).
- Coil Coating: PBT, PET, or epoxy resin.
- Filter: Stainless steel in inlet.
- Operating Pressure: 0.3 - 10 bar.
- Cv-value: 78 l/min.
- Nominal Voltages: 220-240 V AC, 110 V AC, 110-127 V AC, 24 V AC, 12 V AC, 24 V DC, 12 V DC.
- Voltage Tolerance: +10% -15%.
- Duty Cycle: 100%.
- Nominal Power: 8.5 W, 13 VA (AC only).
- Protection Type: IP 00 to IP 68.
- Insulation Class: F according to EN 60730.
- Protection Class: I according to EN 60730.

Dimensions:
- Inlet/Outlet: Brass G 3/4 or G 1, 19.0 mm.
- Length: 88.0 mm.
- Height: 92.0 mm.
- Depth: 45.0 mm.

Additional Features:
The solenoid is replaceable without affecting the medium circuitry, and the valve can be fitted in any position, preferably with the coil upward. It includes a flow regulator on request and pressure surge protection according to EN 60730.