Specifications:
The document describes a 2/2-way solenoid valve with a nominal diameter of DN 17, designed for use with cold and heated potable water and similar media. The valve is servo-controlled and normally closed (NC). It features a single chamber straight valve design with female threads at both inlet and outlet. The valve is constructed with a brass body, stainless steel plunger guide, plunger, and spring, and EPDM membrane and sealings, with NBR available on request. The coil coating options include PBT, PET, or epoxy resin.

Performance and Safety:
The valve is suitable for hot water up to 90°C and offers similar performance for both alternating and direct current. It is designed for long-term performance with optimized water hammer characteristics and low noise emission according to EN 60730. High operating safety is ensured through the use of high-quality materials and 100% final testing.

Applications:
The valve is applicable in various appliances such as steam and dental appliances, hot/cold drink dispensers, industrial appliances, air conditioning, agricultural implements, pollution equipment, temperature equalizers, dishwashers, ice machines, washing machines, and water treatment systems.

Technical Data:
- Operating pressure: 0.3 - 10 bar
- Cv-value: 78 l/min
- Nominal voltages: 220-240 V AC, 110 V AC, 110-127 V AC, 24 V AC, 12 V AC, 24 V DC, 12 V DC
- Voltage tolerance: +10% -15%
- Duty cycle: 100%
- Nominal power: 8.5 W, 13 VA (AC only)
- Protection type: IP 00 to IP 68
- Insulation class: F according to EN 60730
- Protection class: I according to EN 60730

Coil Systems:
Coil systems are available for common voltage and frequency ranges, with electrical operating safety achieved by insulation class F and supported by an integrated protective circuit. The coil connections include flat tabs and plug sockets according to EN 175301-803, with several cable connection options available.

Installation and Maintenance:
The valve can be fitted in any position, preferably with the coil upward. The solenoid is replaceable while the medium circuitry remains untouched, ensuring ease of maintenance.