01.017.126 Servo-controlled solenoid valve NC, DN 17
2Pages

{{requestButtons}}

Catalog excerpts

01.017.126 Servo-controlled solenoid valve NC, DN 17 - 1

servo-controlled normally closed (NC) solenoid replaceable while medium circuit remains untouched, solenoid rotatable 4x90° suitable for hot water up to 90 °C similar performance for alternating or direct current long term performance capability optimized water hammer characteristic by low noise emission according to EN 60730 high operating safety by the use of high quality materials and 100% final testing of the products 2/2-way solenoid valve of nominal diameter DN 17 for use with cold and heated potable water and physically and chemically similar media. The valve is servo-controlled and normally closed (NC). Valves of this design are single chamber straight valves and can be manufactured with various connections. Coil systems for common voltage and frequency ranges are available. Electrical operating safety is achieved by insulation class F and can be supported by an integrated protective circuit. steam appliances dental appliances hot / cold drink dispensers industrial appliances air conditioning agricultural implements pollution equipment temperature equalisers dish washers ice machines washing machines water treatment typical performance curve By using high quality insulation materials, continuous duty (100 % ED) at higher medium temperatures is possible. The glass fibre reinforced polyamide valve body persists hot water. Protection against corrosion of inner parts exposed to the medium is achieved by using stainless steel. © copyright A.u.K. Müller, technical changes reserved

Open the catalog to page 1
01.017.126 Servo-controlled solenoid valve NC, DN 17 - 2

Fitting position any, preferably with coil upwardly cold and heated potable water and physically and chemically similar media Flow regulator Pressure surge Coil type 2/2-way single chamber straight valve, servo-controlled solenoid valve other voltages on request Voltage tolerance +10% -15% Duty cycle stainless steel stainless steel EPDM NBR (on request) VMQ (on request) Coil coating PBT,PET or epoxy resin POM (in inlet) stainless steel on request Insulation class according to EN 60730 according to EN 60730 (for incorporation in class I) 1) Fixing possibility for self tapping screw Ø 4,2 2)...

Open the catalog to page 2

All A. u. K. Müller catalogs and technical brochures

  1. Industry

    16 Pages

  2. Sanitary

    12 Pages

  3. Vending

    16 Pages