Product Information Direct acting solenoid valve, DN 10 media separated A.u.K. Müller Solenoid valves Control valves Special valves and systems A. u. K. Müller GmbH & Co. KG Dresdener Str. 162 D-40595 Düsseldorf/Germany e-mail: [email protected] Internet: www.akmueller.de Characteristics direct acting normally closed (NC) internal plunger assembly medium separated low pressure range of up to 60 mbar solenoid replaceable while medium circuit remains untouched, solenoid rotatable 4 x 90° suitable for hot water up to 98°C long term performance capability high operating safety by the use of high quality materials and 100% final testing of the products Description This 2/2-way solenoid valve has a 10 mm orifice and is designed for use with potable water and physically and chemically similar media. It is suitable for use in low pressure applications such as controlling flow from a tank and can handle a maximum pressure head of 60 cm. dosing systems low pressure applications cleaning equipment industrial appliances The valve is direct acting in operation, normally closed (NC) and the internal plunger assembly is separated from the medium. These valves have a single body chamber. Coils are available in all common voltage and frequency ranges. typical performance curve A high level of electrical operating safety is achieved through its insulation class F which can be supported by an integral protective circuit. The use of high quality insulation materials enables a 100 % duty cycle is be achieved, even at high medium temperatures. For example, the valve body is reinforced with glass fibre to enable use with hot water. Protection against corrosion of inner parts exposed to the medium is achieved by a separating membrane. © copyright A.u.K. Müller, technical changes reserved

Product Information Direct acting solenoid valve, DN 10 media separated Technical Data Type 2/2-way single chamber straight valve, direct activated Fitting position any, preferably with coil upwardly cold and heated potable water and physically and chemically similar media solenoid valve 0 - 60 mbar (0 - 0,87) (psi) MS.006, MS.024, MS.025 MS.006, MS.024, MS.025 220 - 240 V AC 50-60 Hz 220 V AC 50-60 Hz 120 - 240 V AC 50-60 Hz 120 V AC 50-60 42 V AC 50 Hz Hz 42 V AC 50 Hz 24 V AC 50/60 Hz 24 V DC 24 V AC 50/60 Hz 24 V DC other voltages on request other voltages on request +10% -15% +10% -15% 100%...

Product Information Direct acting solenoid valve, DN 10 media separated 1) Fixing possibility for self tapping screw Ø 4,2 2) Fixing groove Options Material G 3/4 (no fixing clip possible) © copyright A.u.K. Müller, technical changes reserved

© copyright A.u.K. Müller, technical changes reserved