1. Catalogs
  2. A. u. K. Müller
  3. 01.010.125 Servo-controlled solenoid valve NC, DN 10

01.010.125 Servo-controlled solenoid valve NC, DN 10

01.010.125 Servo-controlled solenoid valve NC, DN 10

01.010.125 Servo-controlled solenoid valve NC, DN 10

Product catalog summary
Product Overview: The document provides detailed information about the servo-controlled solenoid valve NC, DN 10, manufactured by A.u.K. Müller GmbH & Co. KG. This valve is designed for use with cold and heated potable water and similar media. It is a 2/2-way solenoid valve, normally closed (NC), and features a single chamber straight valve design.
Specifications: The valve body is made of PA 66 glass fibre reinforced material, with options for PPE and PEI. The plunger guide, plunger, and spring are made of stainless steel, while the membrane and sealings are available in EPDM, with NBR and VMQ as options. The coil coating can be PBT, PET, or epoxy resin. The valve operates at a maximum medium temperature of 90°C and an ambient temperature of up to 70°C. It supports a pressure range of 0.2 to 10 bar and has a Cv-value of 21 l/min.
Electrical Characteristics: The valve is compatible with various nominal voltages, including 220-240 V AC, 110-127 V AC, 24 V AC, and 12 V DC, with a frequency range of 50-60 Hz. It has a voltage tolerance of +10% to -15% and a duty cycle of 100%. The nominal power is 8.5 W or 13 VA (AC only). The protection type ranges from IP 00 to IP 68, with insulation class F and protection class I according to EN 60730.
Applications: The valve is suitable for a wide range of applications, including steam appliances, dental appliances, hot/cold drink dispensers, industrial appliances, air conditioning, agricultural implements, pollution equipment, temperature equalizers, dishwashers, ice machines, washing machines, and water treatment systems.
Key Features: The valve is designed for high operating safety with high-quality materials and 100% final testing. It offers long-term performance capability, optimized water hammer characteristics with low noise emission according to EN 60730, and the solenoid is replaceable without affecting the medium circuit. The solenoid is rotatable 4x90° and suitable for hot water up to 90°C.
Options and Customization: Various materials and configurations are available upon request, including different coil types (MS.006, MS.024, MS.025) and flow regulators. The valve can be fitted in any position, preferably with the coil upwardly.
See more

Catalog excerpts

01.010.125 Servo-controlled solenoid valve NC, DN 10-1

Product Information Servo-controlled solenoid valve NC, DN 10 A.u.K. Müller Solenoid valves Control valves Special valves and systems A. u. K. Müller GmbH & Co. KG Dresdener Str. 162 D-40595 Düsseldorf/Germany e-mail: [email protected] Internet: www.akmueller.de Characteristics servo-controlled normally closed (NC) solenoid replaceable while medium circuit remains untouched, solenoid rotatable 4x90° suitable for hot water up to 90 °C similar performance for alternating or direct current long term performance capability optimized water hammer characteristic by low noise emission according to EN 60730 high operating safety by the use of high quality materials and 100% final testing of the products Applications steam appliances dental appliances hot / cold drink dispensers industrial appliances air conditioning agricultural implements pollution equipment temperature equalisers dish washers ice machines washing machines water treatment Description 2/2-way solenoid valve of nominal diameter DN 10 for use with cold and heated potable water and physically and chemically similar media. The valve is servo-controlled and normally closed (NC). Valves of this design are single chamber straight valves and can be manufactured with various connections. Coil systems for common voltage and frequency ranges are available. Electrical operating safety is achieved by insulation class F and can be supported by an integrated protective circuit. typical performance curve 70 60 50 By using high quality insulation materials, continuous duty (100 % ED) at higher medium temperatures is possible. The glass fibre reinforced polyamide valve body persists hot water. Protection against corrosion of inner parts exposed to the medium is achieved by using stainless steel. p / bar © copyright A.u.K. Müller, technical changes reserved

 Open the catalog to page 1
01.010.125 Servo-controlled solenoid valve NC, DN 10-2

Product Information Servo-controlled solenoid valve NC, DN 10 Technical Data Type solenoid valve 2/2-way single chamber straight valve, servo-controlled Fitting position any, preferably with coil upwardly cold and heated potable water and physically and chemically similar media Flow regulator Pressure surge Coil type other voltages on request Valve body PA 66 glass fibre reinforced PPE on request PEI on request (T-medium max. 30 °C) Plunger guide Duty cycle Nominal power stainless steel Protection Type stainless steel EPDM NBR (on request) VMQ (on request) Coil coating PBT,PET or epoxy resin...

 Open the catalog to page 2

All A. u. K. Müller catalogs and technical brochures

  1. Series 11.000

    4  Pages

  2. Vending

    16  Pages

  3. Industry

    16  Pages

  4. Sanitary

    12  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.