*mydirectindustry

Catalogs
U-CONTROL
Vision 305s

Vision 305s

Product catalog summary

Description
Vision 305s is a durable 5.0” touchscreen display with an integrated controller. It features multiple communication interfaces, an ambient light sensor, a multi-color LED, and a built-in loudspeaker. The display is optically bonded for excellent sunlight readability, and the housing is sealed to withstand extreme temperatures, shocks, and vibrations.

Specifications

Display: 5.0” diagonal, 15:9 aspect ratio
Dimensions: 163 x 99.7 x 40.8 mm
Weight: 560 g
Resolution: 800 x 480 pixels
LCD Type: TFT color graphic, capacitive touch, LED backlight

Optical Characteristics

Luminance: 800 cd/m² typical
Viewing Angle: V = +/- 70°, H = +/- 70°
Contrast Ratio: 700:1

Maximum Ratings

Operating Temperature: -30 to +75 °C
Storage Temperature: -40 to +85 °C
Supply Voltage: 8 to 36 V

Standards

CE-Mark 2014/30/EU
E-Mark ECE 10R
EMC ISO 14982
EN 13309
EN 50498
ISO 61000-6-2
ISO 61000-6-4
Ingress Protection: ISO 20653 IP6k5

System Components

Freescale i.MX6S application processor, 32-bit ARM, 800 MHz
2 GB Flash, 512 MB RAM
RTC buffered by supercapacitor
Auto-dimmable display backlight via ambient light sensor
Mounting: Stand-alone or in-dash, landscape or portrait orientation
Projective capacitive touchscreen
Optically bonded

Interfaces

2 x CAN, 10 kbit/s to 1 Mbit/s
1 x USB 2.0 (Type A)
RGB Status LED
1 x RS-232
Terminal 15 key switch (ignition)
1 x integrated loudspeaker

Software
Programmable with CODESYS® V3, supporting CANopen® master or C/C++.

Protection
Reverse polarity protection and protection of all external interfaces (except USB) against short circuit to GND and BAT+.

Note
Subject to changes and corrections. Vision 305s is a product name of TTControl GmbH. CODESYS is a trademark of 3S Smart Software Solutions GmbH. All other trademarks are the property of their respective holders.

Catalog excerpts

HYDAC INTERNATIONAL Vision 305s Description Vision 305s is a robust, 5.0” touchscreen display with a built-in controller. Besides several communication interfaces, the display is equipped with an ambient light sensor, a multi-color LED and an integrated loudspeaker. The Vision 305s display is optically bonded for perfect sunlight readability. The housing is sealed and the device can withstand extreme temperatures, as well as shocks and vibrations. Specifications Reverse polarity protection and protection of all external interfaces (except USB) against short circuit to GND and BAT+. TTControl S.r.l. - Brixen, Italy Tel.: +39 0472 26 80-11 [email protected], www.ttcontrol.com TTControl GmbH - Vienna, Austria Tel.: +43 1

Open the catalog to page 1

Block Diagram Communication Interfaces (User) Interfaces Ambient Light Sensor for auto dimming Touchscreen 5“ LCD Display LED backlighting 800x480 Subject to changes and corrections. Vision 305s is a product name of TTControl GmbH. CODESYS is a trademark of 3S Smart Software Solutions GmbH. All other trademarks are the property of their respective holders. To the extent possible under applicable law TTControl hereby disclaims any and all liability for the content and use of this product flyer. Copyright © TTControl GmbH. All rights reserved.

Open the catalog to page 2

All U-CONTROL catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list