Catalogs >
U-CONTROL >
V24 Multi-axis

V24 Multi-axis
4Pages

Catalog excerpts

Industrial Controllers The association drive V24 is designed as a driving joystick for construction and agricultural machinery. It has a parking position which can be inserted in the zero position. The V24 is characterized by its extremely rugged design. Through it's various interfaces and the many possibilities of combination with our numerous ball handles the V24 is very flexible. ■ Technical data Mechanical life V24 Supply voltage Operation temperature Degree of protection Functional safety 20 million operating cycles see interface -40°C til +60°C IP54 PLd (EN ISO 13849) possible V24 Basic unit V24.1 Multi-axis controller, 1-axis V24L Multi-axis controller, 1-axis with parking position left V24R Multi-axis controller, 1-axis parking position right Gate P1 T-gate main axis axial (included in basic unit!) P2 T-gate main axis right outside P3 T-gate main axis left outside Grip / Palm grip Knob (included in basic unit!) T Dead man B... Palm grip B... (see page palm grip 129) Main axis R Friction brake adjustable (included in basic unit!) Interface (description see on the following pages) E3xx CAN-interface E4xx CANOpen Safety interface Special model X Special / customer-specific Technical details may vary based on configuration or application! Technical data subject to change without notice!

Open the catalog to page 1

Industrial Controllers Combination possibilities with our handles B2 CAN Supply voltage Idle current consumption Mounting depth A Protocol Baud rate Output value Wiring 9-36V DC 120mA 60mm CANOpen CiA DS 301 or SAE J 1939 125kBit/s til 1Mbit/s 0...128...255 CAN (IN) cable 500mm with plug connector M12 (male) CAN (OUT) cable 500mm with plug connector M12 (female) Digital-/analog outputs cable 500mm with plug connector CPC 17-14 (female) CAN V24 - 5 analog joystick axis - 22 digital joystick functions or 18 digital joystick functions + 8 LED-outputs - Input for capacitive sensor with...

Open the catalog to page 2

Industrial Controllers CANOpen Safety Supply voltage Idle current consumption Mounting depth A Protocol Baud rate Output value Wiring 9-36V DC 120mA 60mm CANOpen Safety CIA 304 125kBit/s til 1Mbit/s 0...128...255 CAN (IN) cable 500mm with plug connector M12 (male) CAN (OUT) cable 500mm with plug connector M12 (female) Digital-/ analog outputs cable 500mm with plug connector CPC 17-14 (female) with additional digital-/ analog outputs for the main axis - 2 direction signals + 1 zero position signal (potential-free) per axis - 0,5...2,5...4,5V redundant contra rotating + 2 direction signals +...

Open the catalog to page 3

Industrial Controllers 108,5 Hole pattern Technical details may vary based on configuration or application! Technical data subject to change without notice!

Open the catalog to page 4