Industrial Controllers The multi-axis controller V14 is a robust switching device for remote control and eletro-hydraulic applications. The modular design enables the switching device to be used universally. The V14 is resistant to oil, maritime conditions e.g. offshore / vessels, UV radiation typically from the sun. Technical data Mechanical life V14 Operation temperature Degree of protection 6 million operating cycles -40°C til +60°C IP65 Basic unit V14L 2-axis left Control-handle extended Standard S8 +20mm *Only available in combination with handle! Gate P Cross gate Grip / Palm grip Description axis 1 (direction 1-2) A05 Arrangement MSP21 C61 Mechanical encoder MEC 1-2 Description axis 2 (direction 3-4) Special model Technical details may vary based on configuration or application! Technical data subject to change without notice!

Basic unit Control-handle extended Identification of the installation variants with switching directions: Cross gate Special gate Grip / palm grip Knob 25mm (standard) M Mechanical zero interlock MH Mechanical zero interlock + signal contact GK1MN Mechanical zero interlock (push down) GK1MH Mechanical zero interlock + signal contact GK1DV Flush push button GSP Twist grip 2x5kOhm + direction tracks lmax= 1mA B... Palm grip B... (see page palm grip 129)* *Attention! The multi-axis controller V14 is not suitable for large palm grips (B3, B7/B8,B9...) Axis 1: direction...

Industrial Controllers Z Spring return (included in basic unit!) If both axis identical, it's enough to describe one axis! Beispiel: ...A05C61 + A05C61 => A05C61 V14L S8 P T - 01Z C + 03 R - A05 C61 + A110 - X Axis 2: direction 3-4 left / direction 7-8 right (not applied for V14.1L and V14.1R) Special model Technical details may vary based on configuration or application! Technical data subject to change without notice!

Industrial Controllers Type Technical details may vary based on configuration or application! Technical data subject to change without notice!