SSI
4Pages

Catalog excerpts

PRODUCT DESCRIPTION SSI is available with one or two me- asurement axes. The inclinometer working principle is based on a micro machined sductor (developed with MEMS technology). Utilizing gyro-compensated MEMS technology, the sensor position si- gnal is instantaneous with no delays and has a static excellent linearity. SSI is suited for applications (cranes, aerial platforms, drilling machines and excavators) in harsh environments which are exposed to motion, shock and vibration, especially for mobile machines.. MEMS technology Instantaneous Gyro-compensated High protection level IP67 and wide temperature Range from -40 C ... +85 C Excellent accuracy Reliability and long service life for Stable accuracy over whole temperature range outdoor applications Very compact dimensions High shock/vibration resistance Double axes ± 1 to ± 60 Optional redundant output MEMS sensors technology Canopen output horizontal version vertical version Wide range temperature Redundancy Output High Protection Level Functional safety reverse polarity protection Shock/vibration rasistant U-CONTROL - Via Micheli 9 43056 - S. Polo di T orrile (PR) - P.IVA 02722200348 - T +39 0521 273823 el.: - info@u-control.eu - www.u-control.eu The company reserves the right to make any kind of design or functional modification at any moment without prior notice

Open the catalog to page 1

* value of 360 means range 0° to 360° ** value of 010 means range +/- 10° The company reserves the right to make any kind of design or functional modification at any moment without prior notice

Open the catalog to page 2

TECHNICAL SPECIFICATION Measuring range ±1° to ±60° for horizontal version 0° to 360° for vertical version Material housing Initialing time Shock resistance Vibration resistance ELECRICAL CHARACTERISTICS Power supply Reverse polarity protection Electromagnetic compatibility acc. to EMC guideline 2014/30/EU RoHS guideline 2011/65/EU OPERATING PRINCIPLE MEMS (acronym for Micro Electro Mechanical Systems) techno- logy enables both electronic circuits and opto-mechanical devices to incorporate on the same silicon substrate, using manufacturing technologies similar to those used for the...

Open the catalog to page 3

DIRECTION AXES DUAL AXES The 2-dimensional inclination sensor must be mounted with the base plate in horizontal position, i.e. parallel to the horizontal line. The sensor can be inclined both towards the X and Y axis at the same time. For each axis a separate measured value is provided. SINGLE AXES The 1-dimensional inclination sensor must be installed with its Z-axis in line with the force of gravity, as illustrated below. The 1-dimensional sensor defaul t position is 0° as shown in the following illustration. U-CONTROL - Via Micheli 9 43056 - S. Polo di T orrile (PR) - P.IVA 02722200348 -...

Open the catalog to page 4

SSI 4Pages

Catalog excerpts

All U-CONTROL catalogs and technical brochures

SSI
4Pages